UNSOLVED

farmboy2002

updated

22 years ago

0

6224

April 18th, 2005 19:00

Networking

I have 3 dell computers networking using a hub and 10/100 boards.  I just purchased a new dell dimension 4700 that had a built in 10/100 card on the motherboard.  I can not get networking to work.  I have added a new connection for this computer to the same workgroup as the others and it does it thing but I do not see any other computers.  I go to my network places and nothing shows.  Something is not right.  Do I need to download drivers? Maybe someone can help.. I am using XP professional.
thanks
  • charlye

    102 Posts

    182

    0

    Posted April 19th, 2005 00:00

    Have you tried the XP Network Setup Wizard?

    Charlye

  • jmwills

    2 Intern

    •

    11984 Posts

    182

    0

    Posted April 19th, 2005 01:00

    http://www.microsoft.com/windowsxp/using/networking/learnmore/russel_02april08.mspx
    http://www.tomsnetworking.com/Sections-article64-page1.php
    http://www.theeldergeek.com/quick_guide_to_simple_file_sharing.htm
    http://service.dell.com/dell/topic/1,,33732+30+26124,00.html

    Try these links for starters.  Sounds like you don;t have the drives shared..   You also failed to mention which OS's we are dealing with and exactly what it is you are trying to network (folders, printers, etc).

  • 182

    0

    Posted April 19th, 2005 12:00

    thanks for the response.  Yes I have tried the normal install for networking but get an error sometimes before it completes.
  • jmwills

    2 Intern

    •

    11984 Posts

    182

    0

    Posted April 19th, 2005 13:00

    XP Home and Professional can communicate perfectly fine over a peer to peer netwrok.  My guess is if you deleted the XP installation, you did not reinstall the chip set drivers which allow all the on board devices to communicate thru the motherboard.  The Chip Set drivers will be in the download section above in product support.
  • 182

    0

    Posted April 19th, 2005 13:00

    thanks for the response.  I have printed out a lot of stuff and will go and try it.  Hope fixes my problem.  I did not see anything about drivers.  The new computer has 10/100 installed and office xp home.  I had to delete the home addition because it was later than my xp version.  Did I destroy drivers? or what else?