What kind of fiber do I need for SFP28 SR Optic, 25GbE, 85C
I'm new to fiber optics. We have a new server equipped with a Broadcom 57414 Dual Port 10/25GbE SFP28, OCP NIC 3.0 and we received two SFP28 SR Optic, 25GbE, 85Cwith it; one plugged into the server and the other into the switch - a Cisco CBS 350. There doesn't seem to be a manual for those transceivers - I couldn't fine one. So I wonder - what kind of fiber do I need? I already bought a couple of multimode OM4 fibers, but they don't seem to work. Or maybe there's something else I'm doing wrong?
When only dealing with 1.5m you can choose what ever you want ;) Stay on OM4.
The Cisco SFP-10G-SR sounds right because SR means "ShortRange" which is MMF(MultiModeFiber). The LR is LongRange and SMF(SingeModeFiber).
I dont know what the -S in Cisco SFP-10G-LR-S is good for.
BUT having a 10/25G NIC is great these days... but when having a 25G Tranceiver on one site you need another one on the other(and a 25G Switch of course). Dell also have 10/25G Transceivers but iam unsure what exactly do you have bought.
Within the Dell OSC/Shop you can click the 10/25G NIC and dedicated 10G SR Transceivers.
That depends on the length.... but OM4 is cheap support more lenght as OM3 and thats why its comman use. The reason why it not work is that i have my doubt that a Dell 25G transceiver works in your Cisco Switch.
There maybe rare circumstances where you swap the connector on one side of your patch cable.
@Origin3k That's another problem - Dell doesn't tell much about the transceiver in question. But the salesperson told me it supports 10 Gbit as well....
To talk to a 25GbE SFP28 SR Optic, you need a 10G transceiver that uses 850nm wavelength over multimode fiber (MMF) and supports 10GBASE-SR. That means:
Cisco Transceiver
Compatibility
Notes
SFP-10G-SR
✅ Compatible
850nm MMF, standard 10GBASE-SR
SFP-10G-SR-S
✅ Compatible
Same as above, but S-Class (no FCoE, lower cost)
SFP-10G-LR
❌ Not Compatible
Uses 1310nm over single-mode fiber (SMF)
SFP-10G-LR-S
❌ Not Compatible
Same as above, S-Class version
Why Choose S-Class?
Ideal for standard data center deployments
Great for short-range multimode fiber links (like SFP-10G-SR-S)
Saves money if you don’t need advanced features like Fibre Channel over Ethernet (FCoE) or Optical Transport Network (OTN)
So if you're just running 10G Ethernet over OM3/OM4 fiber in a controlled environment, S-Class is often the smart choice. Want help picking between S-Class and non-S-Class for your setup?
Origin3k
6 Operator
•
2424 Posts
•
12408 Points
0
0
Posted September 15th, 2025 08:02
When only dealing with 1.5m you can choose what ever you want ;) Stay on OM4.
The Cisco SFP-10G-SR sounds right because SR means "ShortRange" which is MMF(MultiModeFiber). The LR is LongRange and SMF(SingeModeFiber).
I dont know what the -S in Cisco SFP-10G-LR-S is good for.
BUT having a 10/25G NIC is great these days... but when having a 25G Tranceiver on one site you need another one on the other(and a 25G Switch of course). Dell also have 10/25G Transceivers but iam unsure what exactly do you have bought.
Within the Dell OSC/Shop you can click the 10/25G NIC and dedicated 10G SR Transceivers.
Regards,
Joerg