UNSOLVED

randyj666

updated

20 years ago

R

randyj666

16 Posts

0

7407

April 8th, 2007 01:00

Redundant 5324s - connect to 6224

Hello group.
I'm fairly new to VLAN and switching concepts, so please be gentle.
 
I have several PE 2950s I'd like to connect via the onboard Broadcom NICS (already setup in SLB 'teams') to two seperate 5324 switches.
On the 5324s, I have two VLANs configured, one for the servers (VLAN 202, on it's own subnet, 10.1.1.0/24), one to manage the switches with (VLAN 211, on a seperate subnet, 10.1.3.0/24). These switchws are connected together via a trunked port, which allows only VLAN 11.
 
One port in each vlan (on each switch) is connected to a 6224, which has two vlans configured, one for servers, one for management.
My desire is to be able to manage all the switches and all the servers from the mangement network
The 6224 is configured to route between the management and server subnets.
 
Additionally, I'd like the 5324s to act in a failover mode... if a server nic, an ethernet cable, or a switch fails, I still need to be able to 'talk' to the servers.
 
I'd REALLY love to be able to do Link Aggregation across the two switches / server NICS, as well.
 
Do we see any issues in a configuration like this, and do we have any suggestions ?
Currently, it seems that when I get it all set up, I end up with blocking from one of the switch management ports.
\
Appreciate any and all commentary, I'm hoping something will spark some new ideas.
 
  • bh1633

    909 Posts

    354

    0

    Posted April 9th, 2007 17:00

    Post a link to a picture so we can see what you are trying to do better.
  • StarLog

    2 Intern

    •

    203 Posts

    354

    0

    Posted April 11th, 2007 01:00

    I also would like to see some kind of drawing, this is something we will be doing in a few months.
    Interesting thing, is the 6224 will end up being your single point of failure, unless you have two of them.
  • randyj666

    16 Posts

    354

    0

    Posted April 11th, 2007 03:00

    In this particular case, th 6224 is 'expendable' - that is, it is only there to allow management/monitoring traffic between the management network, and the (several) 'Production' server networks.
    While it wouldn't be a 'good thing' if the 6224 went down, it wouldn't break our service.