UNSOLVED

nguyenck

updated

2 years ago

N

nguyenck

1 Rookie

•

15 Posts

0

356

August 17th, 2024 07:38

Error from configuring Port Monitoring on switch - Destination port should not be a L2/L3 port

hi 

i need help config port monitoring

i have dell S4148f wwith os 10

i config follow Dell document

" Core-SW2# configure terminal
Core-SW2(config)# interface ethernet 1/1/2
Core-SW2(conf-if-eth1/1/2)# no shutdown
Core-SW2(conf-if-eth1/1/2)# exit
Core-SW2(config)# monitor session 1
Core-SW2(conf-mon-local-1)# source interface ethernet 1/1/53 both
Core-SW2(conf-mon-local-1)# destination interface ethernet 1/1/2
Core-SW2(conf-mon-local-1)# no shut
Core-SW2(conf-mon-local-1)# exit"

This config has complete 

but i have question

My computer connect to ethernet 1/1/2 to collect information, now to config it on dell switch then ethernet 1/1/2 become no switchport and i can not recevied any thing from that port

Please tell me how to fix it

Thank

  • DELL-Joey C

    Moderator

    •

    4170 Posts

    •

    20965 Points

    0

    0

    Posted August 19th, 2024 01:17

    Hi,

     

    Looking at your configuration, have you already configure port 53 as no shutdown no switchport?

     

    When you do a #show monitor session all, what is the output?

     

    Have you connected port 53 to any device?

    DELL-Joey C

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’ if I did. 

  • nguyenck

    1 Rookie

    •

    15 Posts

    0

    0

    Posted August 19th, 2024 02:43

    @DELL-Joey C​ hi 

    you understand wrong

    that example source port 1/1/53 and so port 53 is normal

    destination port 1/1/2 so port no switch port

    now i mean : my server connect to 1/1/2 to collect information impossible so , if i want to collect information, my server could connect to where

    my example config done, status true up correct dell document

  • DELL-Joey C

    Moderator

    •

    4170 Posts

    •

    20965 Points

    0

    0

    Posted August 19th, 2024 05:05

    Hi,

     

    I might be misunderstanding your implementation. Mentioned that if you have done #show monitor session all and the state is true, then the configuration should be working. Now do let us know what is your environment setup. What connected as client device (source port), and what is connected as monitoring device (Destination port)? https://dell.to/4dLqleu

     

    Can you do #show running-configuration and paste the output here. 

    DELL-Joey C

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’ if I did. 

  • nguyenck

    1 Rookie

    •

    15 Posts

    0

    0

    Posted August 19th, 2024 13:52

    @DELL-Joey C​ 

    hi

    very simple, now i need mornitoring port, with dell system how can i take this

    my server connect to switch port e1/1/2

    please show me how may server collect information

    my config sure right, 

    but i can not understand my server connect to port e1/1/2 to collect so port e1/1/2 has destination port, but in config destination port has no switchport, how my server could be collect

    Do you understand what i mean? can you show me real example config port mornitoring Dell Switch S4148F

  • DELL-Erman O

    Moderator

    •

    2984 Posts

    •

    14874 Points

    0

    0

    Posted August 19th, 2024 14:22

    Hi, 

    You can review pg between 244-255 there are very detailed information https://dell.to/3SUbwy8

    DELL-Erman O

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!

  • nguyenck

    1 Rookie

    •

    15 Posts

    0

    0

    Posted August 20th, 2024 03:29

    @DELL-Erman O​ 

    HI

    in this example you share me

    OS10(config)# monitor session 1 OS10(conf-mon-local-1)#  OS10(conf-mon-local-1)# source interface ethernet 1/1/7-1/1/8 rx OS10(conf-mon-local-1)# destination interface ethernet1/1/1 OS10(conf-mon-local-1)# no shut

    if example type CLI same that with local mornitor in Dell Switch S4148 the result "% Error: Destination port should not be a L2/L3 port"

    you need more config with interface ethernet 1/1/1 no switch port then example you share will work

    ok, after that, what i'm need you help answer : my server connect to port 1/1/1 or witch port to collect information, if connect to 1/1/1 impossible, if connect another port so is port 1/1/1 leave unused

    thanks

  • DELL-Joey C

    Moderator

    •

    4170 Posts

    •

    20965 Points

    0

    0

    Posted August 20th, 2024 04:53

    Hi,

     

    I assume your server is the monitoring device that need to receive the monitored data from source port. With that, I am assuming (with accordance with the user guide, port 2 is the destination port) the server need to have the monitoring software. May I know what software are you using to monitor? 

     

    When a port is configured as no switchport, it operates in Layer 3 mode, meaning it can be assigned an IP address and used for routing. However, in the context of a monitoring session, the destination port is used to receive mirrored traffic and should not have an IP address or VLAN configuration.

    DELL-Joey C

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’ if I did. 

  • nguyenck

    1 Rookie

    •

    15 Posts

    0

    0

    Posted August 20th, 2024 06:56

    @DELL-Joey C​ 

    HI

    I assume your server is the monitoring device that need to receive the monitored data from source port. With that, I am assuming (with accordance with the user guide, port 2 is the destination port) the server need to have the monitoring software. May I know what software are you using to monitor?

    ----> that mean device need to collect information connect another port difference destination port, is that true?

    because my device use any sofware need connect the system must be collect information

    When a port is configured as no switchport, it operates in Layer 3 mode, meaning it can be assigned an IP address and used for routing. However, in the context of a monitoring session, the destination port is used to receive mirrored traffic and should not have an IP address or VLAN configuration

    ---> for this thing, i try a real system, if port no swtich port, you can not used and set ip address, and for this solution ( monitoring) port need not L2/L3 port : i do not know you true or dell document true, but for a both ability need information exactly

  • DELL-Joey C

    Moderator

    •

    4170 Posts

    •

    20965 Points

    0

    0

    Posted August 20th, 2024 09:05

    Hi,

     

    ----> that mean device need to collect information connect another port difference destination port, is that true? 

     

    Other devices are connected as source ports. Source ports can be as many but destination port is only 1, which is your server that is used to analyze using software. 

     

    ---> for this thing, i try a real system, if port no swtich port, you can not used and set ip address, and for this solution ( monitoring) port need not L2/L3 port : i do not know you true or dell document true, but for a both ability need information exactly

     

    Other ports that are connected to other device can be configured as desired. Only the destination port, your server/analyzer will be configured as no switchport no shut

    DELL-Joey C

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’ if I did. 

  • nguyenck

    1 Rookie

    •

    15 Posts

    0

    0

    Posted August 20th, 2024 09:46

    @DELL-Joey C​ 

    Hi

    Thank for many reply form you but now i can not understand because Dell Switch S4148 very difference Cisco Switch i was config port monitoring

    now i show my system, please help me how to config, i think that fastest

    That my topology

    now i want collect information traffic via port 1/1/2, port 1/1/48 is trunk port beetwen S4148F vs Cisco 2960

    my config on dell switch source port 1/1/48

                                            destination port 1/1/2

    IS MY CONFIG true?

    If not, please tell me how

    Thanks