UNSOLVED

SanbornTech

updated

11 years ago

0

20485

June 1st, 2015 08:00

Cannot back-up 7024 config files using OMNM

I'm trying to backup my PowerConnect 7024 switches using OMNM 5.3.0.3.

I can log into the switches directly and back them up with no issue using tftp.

All my other switches can be backed up using OMNM.

The error I get from OMNM is:

Unable to write backup file to application server drive.
Device Driver Indicated that the backup operation was successful, but the backup image was not populated by the Device.
Possible reasons for this error:

1. The selected TFTP/FTP Server combo does not have FTP and TFTP writing to the same path.

Logging into my management server using FTP, I'm pointing to the correct directory. I'm using 3CDaemon and both my FTP and TFTP protocol is pointing to the same directory as well.

I've tried backups using FTP and TFTP protocols specifically with OMNM both fail.

Thanks,
Kevin
  • 610

    0

    Posted June 1st, 2015 12:00

    My other switches are 5548s and 5524P (about 41 is total). Two of the 7024 are at 5.1.0.1 and the third is at 5.0.1.3. Yes the 7024 are all responding. If I putty to the switches I can back them up to the file server using TFTP with no issue. Very strange.