UNSOLVED

Nitrobass24

updated

20 years ago

0

7694

January 13th, 2007 21:00

3024 Installation

Hi, i just got my PowerConnect 3024 today and i want to set it up
heres my setup
 
WEB<------>Motorola SB5101 Cable Modem<----->D-link Wireless Router<---->Powerconnect 3024<----> Computer1,2,3, etc.
 
The internet works on all of them, but i have no idea how to access the Web user interface to set certain settings. What is the default IP of the switch, and default username and pass? If they are not currently set at default how can i reset to factory settings?
 
 
  • 128

    0

    Posted January 14th, 2007 19:00

    If there is no configuration on the switch that has set a UID and password on the consoleport, then connect up a PC via the DB9 console port, set hyperterminal ( or whatever ) to 9600 8,N,1.
     
    You should get the main menu ;

    Press Enter

    type the correct IP address 

    Enter the address of the default gateway if accessing the web interface from a different subnet to the one the switch is in

    Enter the appropriate network mask for this network

    Press Ctrl & w to save

    Then you need to set a password;

    Tab thru the system manager screen to General, select, then select password admin

    set your password, then save again.

    You should then be in business; http to the IP address, username is root