I inserted all of the Networker license key such as "Networker server with 10 client", "autochanger", "Dedicated Storage node X 6", "Client X 14".
I configured the Networker server and tape library, tested backup is ok. Then i configured 2 storage node (A,B) and test backup is ok too. but when i configured the remain 4 storage node (C, D, E, F), a error is shown "Cannot create device, storage node enabler required".
I did try delete A, B and configure C, D only, and also got error.
Your server and storage nodes also take up a Networker client license but I don't think that is the issue here. These storage nodes are "dedicated storage nodes" which means they can only back themselves up which is why the licensing cost is much less... When you create the device for that storage node ensure you check the box for "dedicated storage node" and you should be able to add it.
Every time I need to configure Dedicated Storage nodes, I do a maneuver: 1 - Add the licenses of Dedicated Storage Node. 2 - Add a trial license for Storage Node 3 - Add and configue a Storage Node. 4 - In devices this Storage Node that you just added, check the option Dedicated Storage Node. 5 - Now the Storage Node license is free. 6 - Repeat step 3 and 4 until all Storage Nodes add. 7 - Delete the Trial Licenses
DavidHampson
2 Intern
•
1080 Posts
356
0
Posted August 20th, 2009 06:00