I have a huge issue with a customer environment, when i try to run a savegrp trough the command line, i run the savegrp and inmediately shows the command prompt not doing nothing, nothing appears in the daemon, it is like Networker don't detect that a savegrp has been launched. It could be that nsr binaries are corrupt? i already restart the backup server.
connectivity is ok because we try with several clientes, i used the -vvv from the beggining. It is something very weird, as i said i type the savegrp command, i press enter and the command prompt appear again, in the daemon nothing happen. All services are running.
First I would suggest starting it with -vvvv switch and see if you get a little more info; do you see anything occuring on the server? Have you verified connectivity with the client (pings, nslookup).
"connectivity is ok because we try with several clientes" - could you explain this - are you saying you run a backup of the same client from a different group on the same server and it is okay? It sounds to me like you have not tested connectivity...
Next thing to try - go to the client and run a backup from there (either from the GUI or save command at the command line)
Also as suggested run a probe and see if that completes:
skdfsa
3 Posts
373
0
Posted August 12th, 2009 09:00