jlcasaux

updated

19 years ago

J

jlcasaux

29 Posts

0

1556

August 23rd, 2007 12:00

Problems with VSS

Hi everybody. I'm having problems with a Windows 2003 Networker client that has Exchange installed also. When backing up the savet set "All" and try to use VSS to backup the disks it shows an error message: "VSS snapshot failed with error 0x80042301 -- VSS Backup or Restore is not in the correct state for the operation, or the writer is not in the correct state". And also, in 2 cases, it causes to get down the cluster and SMTP services. The Networker Server is in evaluation mode.
The questions in this case are:
1. Is recommended to disable VSS services on the Exchange machine? Networker uses it for any kind of backup?
2. Or is better to put the licenses except VSS on the server, so the next time VSS will not be used for backup the disks?
I searched for some similar cases but I unfortunately found nothing.
Thanks for your help.
  • ble1

    6 Operator

    •

    14354 Posts

    •

    56186 Points

    515

    0

    Posted August 23rd, 2007 23:00

    If you don't have VSS license then NW will use legacy backup method and no VSS would be used (unless using 7.4 and Vista client).
  • ble1

    6 Operator

    •

    14354 Posts

    •

    56186 Points

    515

    1

    Posted August 23rd, 2007 14:00

    The error comes from VSS API - you can check state of it via vssadmin command.

    VSS will usually be used for file system backup and that one should not apply to your Exchange backup which should be handled by module.
  • jlcasaux

    29 Posts

    515

    0

    Posted August 23rd, 2007 20:00

    One more question: If I don't have the license for backup with VSS in the server, can I say that the possibility of having this behavior is almost null? What do you think?
  • RussellJ1

    15 Posts

    515

    1

    Posted September 13th, 2007 07:00

    we have a server that is doing this as well. if you check your system services i bet the volume shadow copy service is stuck in a "stopping" state.

    we had 3 or 4 different applications running on that server that used VSS and i think it just overloaded the server.
  • cfaller

    96 Posts

    515

    0

    Posted September 17th, 2007 18:00

    if you dont have an "open file option" license in place to allow vss functionality, just disable it in the client definition to allow networker to perform the backup using asr etc...
    in save operations field place; VSS:*=off

    if you end up applying an OFO license you can just take this out of the client def...