UNSOLVED

rtpani1

updated

20 years ago

R

rtpani1

1 Rookie

•

28 Posts

0

958

December 15th, 2006 02:00

Networker server without storage device

Hello,

I want to set up Networker 7.3.2 server on a machine which doesn't have any backup device connected. This machine has to take backup of the servers which are connected on the SAN. Tape Library is also available on SAN and is shared between these two servers. But my Networker server machine is not connecting to the SAN through HBA. It's connected in the network through LAN only.

Can I setup the Networker server in the above scenario ? If so, how ? Wud request ur suggestion...Thanks !!

Regards
  • ble1

    6 Operator

    •

    14354 Posts

    •

    56186 Points

    574

    1

    Posted December 15th, 2006 02:00

    Well, the best thing would be to start with Administration guide then.

    In short, server requires to have local device for it's own database backup (can be directed elsewhere via network). As you can't present tape(s) via SAN you can create something called file device and use that as your storage. More details you will find in admin guide.
  • ble1

    6 Operator

    •

    14354 Posts

    •

    56186 Points

    574

    1

    Posted December 15th, 2006 02:00

    You can. You will need file device created for bootstrap and server's index backup.
  • rtpani1

    1 Rookie

    •

    28 Posts

    574

    0

    Posted December 15th, 2006 02:00

    Thanks for the info. Let me try that and see.
  • rtpani1

    1 Rookie

    •

    28 Posts

    574

    0

    Posted December 15th, 2006 02:00

    Hello,

    Thanks for your quick reponse. As I am quite a novice with the product, I would request you to give me some broad installation guidelines, like what component I need to install on the servers, how to set file device for bootstrap/server's index etc. Anyhow I am checking for the networker guides also.

    Regards,
    R.Thandayuthapani
  • dpinink_silva

    2 Intern

    •

    724 Posts

    574

    0

    Posted December 15th, 2006 05:00

    There a lot of ways you can do this, using dedicated storage nodes and DDS to backup the servers on the SAN is one way I like to do, but there are other options that will find in Admin Guide, as said above.
  • dpinink_silva

    2 Intern

    •

    724 Posts

    574

    0

    Posted December 15th, 2006 05:00

    Yes, I was talking about the backup for the other servers. As he told that he was new to this, maybe he needs directions for all the configurations :)

    For backup index and bootstrap he'll probably need a file device, as you said before.
  • ble1

    6 Operator

    •

    14354 Posts

    •

    56186 Points

    574

    0

    Posted December 15th, 2006 05:00

    He can't use DDS for server as there is no SAN connection. The only way to get tape would be to directly switch it to server if those two are next to each other which I doubt is the case.