UNSOLVED

bfoy

updated

17 years ago

B

bfoy

9 Posts

0

771

July 1st, 2009 08:00

NDMP Authorization failure

NDMP access from Server to client fails with these entries in daemon.log:
07/01/09 17:37:56 nsrmmd #3: ******************************************************************
07/01/09 17:37:56 nsrmmd #3: ------ E R R O R -------
07/01/09 17:37:56 nsrmmd #3: connect auth: connection has not been authorized
07/01/09 17:37:56 nsrmmd #3: ******************************************************************
07/01/09 17:37:56 nsrmmd #3: The NDMP connection is not successfully authorized on host 'namsn2'.
07/01/09 17:37:56 nsrmmd #3: failed to establish connection to NDMP server
07/01/09 17:37:56 nsrmmd #3: ndmp tape setstate failed
07/01/09 17:37:56 nsrmmd #3: ndmp tape setstate failed
07/01/09 17:38:02 nsrd: media info: unload error for jukebox `STKL180' detected. Retrying
07/01/09 17:38:02 nsrd: media info: unload retry for jukebox `STKL180': sleeping 30 seconds
07/01/09 17:38:02 nsrd: server info: # /usr/ucb/logger -p daemon.notice: Broken pipe
07/01/09 17:38:33 nsrd: media info: unload retry for jukebox `STKL180' failed - will retry again.
07/01/09 17:38:33 nsrd: media info: unload retry for jukebox `STKL180': sleeping 30 seconds
07/01/09 17:38:33 nsrd: server info: # /usr/ucb/logger -p daemon.notice: Broken pipe

What should I check after having setup a login account and password on NDMP server?
  • ble1

    6 Operator

    •

    14354 Posts

    •

    56186 Points

    227

    0

    Posted July 11th, 2009 02:00

    First verify that you have correct login and password. If so, verify that has been used for client, device and storage node setup.
  • rmines1

    49 Posts

    227

    0

    Posted August 21st, 2009 11:00

    Please advise if the username/password was the problem causing your failure.

    If the login credentials have been verfied and the problem is continuing. Please advise:

    The type of NAS filer being used
    The version of the OS running on the NAS filer
    The version of NetWorker being used

    From the above information I can then provide more targeted points to check based on the type of NAS filer and versions of code.

    Regards,
    Rita Mines