UNSOLVED

MarcLewis

updated

17 years ago

M

MarcLewis

18 Posts

0

1262

November 5th, 2009 06:00

Labelling tapes through command prompt

Hi,

Is it possible to label tapes through a command prompt?

Cheers,

Marc
  • lpamintuan

    1 Rookie

    •

    41 Posts

    534

    0

    Posted November 5th, 2009 06:00

    I use this command on Red Hat Linux.

    nsrjb -LYRv -S 1-5

    (L - label, Y - yes, R - relabel, v - verbose, S - slots to label/relabel).

    If you are to label new tapes, you will need to specify a pool.

    nsrjb -LYRv -S 1-5 -b Mypool
  • satishs

    50 Posts

    534

    0

    Posted November 5th, 2009 08:00

    I usually use this...

    nsrjb -L -Y -S 140-143 -b 'ALLNAS INCR' -f /dev/rmt/0cbn

    ( -b = pool name)

    Of course you can check the device name from nsrwatch etc...
  • MarcLewis

    18 Posts

    534

    0

    Posted November 6th, 2009 02:00

    Excellent! Thanks very much for your help. I have gone for the following line and it works great...

    nsrjb -L -s BORIS -Y -b Monthly -S 1 EXTNOV09A

    We have a couple of sites with single tape drives, will this command line work there as well?
  • jsallila

    56 Posts

    534

    0

    Posted November 6th, 2009 04:00

    I have used this kind of script if there is multiple tapes to label:

    for i in `cat slots.txt`
    do
    nsrjb -j jukebox -L -Y -b 'Filesystem' -S $i
    if [ $? -ne 0 ]
    then
    echo "Operation unsuccesful"
    exit 1
    fi
    done

    You have to create file where there are list of slots to be labeled. In this case it is named slots.txt. One slot number/line.

    This script can be used for other commands too. I have tested this for mminfo also when I have changed retention periods for large amount of savesets.

    I don't know if this works on Windows. Propably not.
  • pheikens

    96 Posts

    534

    0

    Posted November 6th, 2009 06:00

    With single drives you will have to use nsrmm.
    i.e nsrmm -l -b [-y] [-f /path/to/drive]

    use -f as there is not only one device
    use -y instead of -Y

    Peter

    Message was edited by:
    Peter Heikens