
UNSOLVED
U
UDtPEyy2F412578
4 Posts
0
1453
July 8th, 2010 05:00
Element address
How will i get element address for all the drives in tape library ?
Responses (3)
Solutions (0)
UDtPEyy2F412578
4 Posts
529
0
Posted July 8th, 2010 05:00
For a single drive... eg /dev/rmt/0cbn
Reply Hi,
You gather the scsi id by running the "inquire -lc" command.
The id would be in the format scsidev@X.X.X (example scsidev@1.1.0)
Afterwards run the command sjisn scsidev@X.X.X (example scsidev@1.1.0)
The results will show the element address.
To verify a device, you may cross reference the serial# from the inquire output, with the serial # in the sjisn output.
KB atricle esg93274 found here http://solutions.emc.com/emcsolutionview.asp?id=esg93274 describes how to use the abovementioned commands in details.
Regards,
John
Reply

snthr
12 Posts
529
0
Posted July 8th, 2010 05:00
Hi,
Do inquire, then sjisn
BR