UNSOLVED

mivancev

updated

21 years ago

M

mivancev

19 Posts

0

822

April 4th, 2006 00:00

Do I have to set cleaning tape in Networker ?

Do I have to say for Networker where are cleaning cartridge set although I use IBM auto clean enabled option? and I don't use Networker for cleaning drives?
There are about 700 slots available in Tape Library 3584, we are using Networker with license "autochanger with unlimited slots". Tape Library knows exact row, column and frame where is cleaning tape, and Networker expect number of slot where is set clean tape, for example 256 .
How can I be sure that Networker slot 256 is for example F=1,C=8,R=14, in Tape Library 3584?
I ask this question because I am not sure that Networker won't try to write over cleaning tape ?

Thank you for your answer.
  • pgolob

    37 Posts

    334

    1

    Posted April 4th, 2006 00:00

    If you don't use Networker Autocleaning I believe seting for cleaning slots in Networker is not used. You should reserve cleaning slot(s) on library itself. But there can be an issue with inventory. If there were no reserved slots for cleaning on library before, library will now report less slots, so you can have a problem with inventoring of slots. At list I have such experience with HP libraries. I solved it with fresh jbconfig - after it number of slots was correct.
  • ble1

    6 Operator

    •

    14354 Posts

    •

    56186 Points

    334

    0

    Posted April 4th, 2006 01:00

    Check what NetWorker sees with sjirdtag. If you have cleaning tape in slot 255 (and total of 700 slots) then you must set available slots in jukebox property to something like:
    1-254
    256-700