We got a strange problem on some of our customer sites:
- NetWorker 7.x (some 7.2.x, some 7.3.x)
- Windows 2003
- DataDomain Disk Storage
We got backup performance (using NetWorker adv. File Device) ranging from 10 to 20 MB/s.
- "Normal" file copy between Client and Backupserver: >40 MB/s
- "Normal" file copy from Backupserver to DataDomain: >40 MB/s
- Customers have tested with other OS (same Hardware): >40 MB/s
- Customers have tested other Backup Softwares (same Hardware): >40 MB/s
So, Problems seems to be related to NetWorker on Windows.
Has anyone got the same issue?
Is there anything to adjust to get more performance?
Anuj, what you say is correct, BUT: - Michel said that copy on that box is faster (no network) - network backup is faster too
In those tests only difference was copy vs. NW. From what I saw they had same target and source.
What I know from past is that DD box can be slowed down upon periodic check for what needs to be removed from it and depending on size that may take time and may influence speed. Check to see if DD was idle at that time.
Make another test then; create file device which does not reside on DD box. I know this could be a problem as you need at least some ATA or even better SATA disk volume for such test, but if you can that would be great. With that you wish to see if issue itself is related to DD box or communication with DD box.
Also, what is your server version? Since today both 7.2.2 and 7.3.2 have jumbo patches available so you never know...
amediratta
2 Intern
•
2014 Posts
343
0
Posted December 13th, 2006 07:00
Multiple streams of data at the same time can boost the performance much higher than what could be obtained using a single stream of data.