UNSOLVED

bagheri

updated

19 years ago

B

bagheri

27 Posts

0

474

April 24th, 2008 00:00

Abnormal Networker Drive Status Change

I am using Networker 7.3.2 on Solaris 10 and ADIC Scalar i2000 with 8 tape drives, I have recently encountered a problem. During each day almost all my drives in networker and storage nodes are taken in service mode and all my backups are suspended, please recommend me what the problem might be? there is no basic problems such as cleaning requirements, drive or media failures, i have checked them before.
  • HabibG2

    455 Posts

    142

    0

    Posted April 24th, 2008 00:00

    Login into the management consol of the library and look at the log. It can be a problem with the unit itself.

    have a look at your daemon.log, check what time the library is disabled.

    What have you done so far to make the drive ready? Try reboot the library.
  • ble1

    6 Operator

    •

    14354 Posts

    •

    56186 Points

    142

    0

    Posted April 28th, 2008 03:00

    You should check logs to see what caused drive to go into service mode - from that point it should be easy to resolve it.
  • Biku1

    42 Posts

    142

    0

    Posted May 28th, 2008 00:00

    Hi ,


    There may be some hardware issue if the drive status is going to service mode status