U4025QW, cannot update to firmware M3T105 via macOS Tahoe 26
I've tried this from two 2024 Macbook Pro M4s running Tahoe 26.0.1. One is using M4 Pro chips, the other M4 Max. The firmware utility says the Model No and Current Firmware are 'Not detected' and the error says 'The selected firmware is not for this monitor'. Can anyone advise how to make this work?
Dell has published an official article about this issue.
Cause: A change in Apple’s libusb API in macOS Tahoe (26.0.1) broke compatibility with Dell’s firmware update tool, leading to the error “The selected firmware is not for this monitor.”
Resolution: Apple has acknowledged the problem and will fix it in an upcoming macOS release. Until then, you can update your monitor firmware using:
A Windows PC, or
A Mac running a version before Tahoe or any post-Tahoe beta.
We have notified the Displays team of these threads. sirgromit39f9dc had same issue here =
UPDATE: I was able to update the firmware using my old 2017 MBP (Intel) which was running macOS Ventura 13.7.8but not with my 2024 MBP (M4) which is running macOS Tahoe 26.0.1.
If you have a Windows OS PC, connect the U4025QW to it and try running the U4025QW Windows OS M3T105 firmware update.
I had the same problem. I was able to use a Windows 10 laptop to upgrade the firmware. The mac I originally tried to update the firmware with is a MBP 2023 running Tahoe 26.0.1 with an Apple M2 Max chip in case it's helpful.
DELL-Nat M
Community Manager
•
3803 Posts
•
21463 Points
0
0
Posted December 9th, 2025 19:35
Hi everyone,
Dell has published an official article about this issue.
You can read the full details in Dell’s official article: Dell Monitor Firmware Issue With macOS Tahoe
(edited)
#IWork4Dell