I got this monitor less than a month ago. The integrated USB hub seems to have intermittent problems. Half the time, when rebooting, USB devices do not get connected in time to be recognised by BIOS, and I am unable to use them until the OS loads (which is annoying because I rely on them to choose which OS boots in the bootloader). More painful, sometimes USB devices plugged into the monitor stop working altogether. They start working again if I plug them into a port on the PC itself, or if I restart. Is this a known problem with this model? Perhaps my unit is defective and I should seek warranty replacement?
I updated the firmware to M2T102 and saw that there was a notice about it here. But I have run into the issue again, however, so the firmware update is not a fix.
I found that turning the monitor off and on will fix the connectivity issue at boot, but that stinks. This thing is not fit for purpose.
user_0d89e1
1 Rookie
•
3 Posts
•
2 Points
0
0
Posted October 16th, 2025 06:39
I updated the firmware to M2T102 and saw that there was a notice about it here. But I have run into the issue again, however, so the firmware update is not a fix.
I found that turning the monitor off and on will fix the connectivity issue at boot, but that stinks. This thing is not fit for purpose.
(edited)