U3223QE, KVM switching two PCs, upstream from 2nd PC not working
When I connect the second PC to the motherboard this setup works. However when I connect the DP cable to the Saphire RX 7900 graphics card the USB-C data upstream connected to the motherboard stops working. The Saphire card only has DP and HDMI outputs.
This is my setup:
PC 1
HDMI cable video - USB-C data
PC 2 - motherboard connection working
DP cable - USB-C data
Is the problem with the Display Manager settings? These are my settings:
I have this same question. A brand new U3225QE and I would like to connect to different desktop computers and have the power thunderbolt available to plug my laptop into as needed. I have two different desktops for work (two different networks) and at times need to connect my laptop.
Contact Dell GHN (Get Help Now) chat technical support Monday through Friday. Click the blue "Get Help Now" on the right to start a private live chat session. Share the private U3225QE Service Tag with them so that they can verify the ownership and warranty status. This will also generate a unique Technical Support case for your unique Service Tag.
Computer HDMI out --> HDMI to HDMI cable --> U3223QE #3 HDMI in Computer USB-A --> U3223QE 1M USB-A to USB-C cable --> U3223QE #8 USB-C upstream (data)
* Open DDPM 2.2.0 * Go to Input Source--> General. Should show "Current input Source = HDMI" * Input Name = HDMI * USB Upstream = USB-C2
Computer DP out --> DP to DP cable --> U3223QE #4 DP in Computer USB-A --> U3223QE 1M USB-A to USB-C cable --> U3223QE #8 USB-C upstream (data)
* Open DDPM 2.2.0 * Go to Input Source--> General. Should show "Current input Source = DP" * Input Name = DP * USB Upstream = USB-C2
Computer TB/USB-C --> U3223QE 1M USB-C to USB-C cable --> U3223QE #5 USB-C port (video + data) * Open DDPM 2.2.0 * Go to Input Source--> General. Should show "Current input Source = USB-C" * Input Name = USB-C * USB Upstream = USB-C1
@DELL-ChrisM2 OK I've installed the updates (I've never received a notice to do so) and it removed my hotkey KVM assignment so I tried putting it in "Toggle to Next Import Source" which is the wrong field. That actually disabled the second PC entirely. So I put some random key combination there and assigned it in "Switch between two input sources" which is correct. How do I reset the first one to None. An online search told me to go to Settings/Options which does not exist.
@DELL-ChrisM2 Looking at option 3 if I can't get separate cables to work for the problem PC it seems it's extremely difficult to find a DP 2.1 to USB thunderbolt cable. They only appear to be on Amazon and they seem to be USB-C to DP not the other way around. Some are one way - is that one way the wrong way? - Can you recommend an exact model of cable for this purpose?
DisplayPort to USB-C bidirectional cables exist. But Dell has not validated any. Dell only validates single direction cabling. USB-C to DP or USB-C to HDMI.
@DELL-ChrisM2 The link you gave me are not thunderbolt cables. I still haven't found an actual thunderbolt to displayport bi-directional 6ft cable. (Or any length). I'm starting to think it doesn't exist. There are loads of "Thunderbolt compatible" cables which are actually just USB-C so you have to be careful reading the descriptions. A lot of thunderbolt descriptions mention Macbooks which makes me wonder if a so-called Mac thunderbolt cable would work with the monitor.
letti001
1 Rookie
•
33 Posts
0
0
Posted February 1st, 2026 03:01
I have this same question. A brand new U3225QE and I would like to connect to different desktop computers and have the power thunderbolt available to plug my laptop into as needed. I have two different desktops for work (two different networks) and at times need to connect my laptop.