This is still a problem to this day with the U3014 even on a NvIdia RTX4090 & my old build with a GTX 1070 before it. If DP 1.2 is selected, DDC/CI is unavailable making.
I recently acquired 3 U2713HM's & found they will only run 2560x1440 over DisplayPort. This is a problem because the RTX 4090 has only 3 DP ports & 1 HDMI port. My workaround was gonna be giving DP 1.2 daisy chaining a try, only to re-discover the monitor doesn't work correctly in DP 1.2 mode even on the latest & greatest GPU.
DDM 1.56.2110 was the last version tested for those older monitors.
To be clear, from that single RTX 4090 you are trying to run four monitors? The 10 year old U3014 2560x1600 and three 11 year old U2713HM 2560x1440?
What is driving this? CPU, Amount of system RAM, operating system, etc.
Forget MST daisy chaining and try this =
RTX 4090 HDMI out --> U3014 HDMI in RTX 4090 DP #1 out --> #1 U2713HM DP in RTX 4090 DP #2 out --> #2 U2713HM DP in RTX 4090 DP #3 out --> #3 U2713HM DP in
Was looking into this again / Googling & just found my own post. Never realized there was a reply.
Systems Specs:
Win 11 EDU 22H2
MSI PRO Z790-P WIFI (MS-7E06) (Nuvoton NCT6687D)
CPU [#0]: Intel Core i7-13700K
64GB (2x32GB) DDR5-6600 30-36-34-36
2TB Corsair MP600 PRO XT NVMe
24TB MSFTStoragePool from 10 Samsung 870 SSDs over PCIe2.0-8x SCSI controller
SoundBlaster AE-7
GPU / Monitors: (Note: I've overclocked all the refresh rates. Surprisingly all are currently limited by DP1.1 bandwidth. I'm not sure how high the U3014 would go on DP1.2, ideally 90Hz to match the others. In 8bit mode it'll do 72Hz before running out of bandwidth.)
RTX4090FE. outputs to:
U3014 over DP1.1: 2560x1600 @ 10bit @ 66Hz
U2713HM over DP1.1: 1440x2560 @ 8bit @ 90Hz
U2713HM over DP1.1: 1440x2560 @ 8bit @ 90Hz
(sometimes) 4k 75" TV over HDMI through the wall into the next room
Intel Integrated Graphics / Mobo, outputs to:
U2713HM over DP1.1 2560x1440 @ 8bit @ 90Hz
The work around for my original problem was just to use the integrated GPU for the 4th monitor. The problem that lead me here again is I just discovered the U2713HM's could do 90Hz when forced to. But many programs such as Chrome cap FPS to refresh rate of the Primary Monitor, in this case the U3014 @ 66Hz. On testufo.com I could only get 90fps if I changed primary monitor to a U2713HM https://i.imgur.com/1vZyEuZ.jpeg.
I then came across this chart on wikipedia that shows the RefreshRate limits I've hit perfectly align with DisplayPort1.1 HBR bandwidth limits. Meaning the U3014, if it was in DP1.2, could probably actually do much higher Refresh Rates, perhaps even match 90Hz.
BUT, when in DP1.2, DDC/CI doesn't work! The ability to control brightness & contrast through TwinkleTray is indispensable to me. Sure 90Hz would be awesome, but I really don't want to lose the ability to set brightness based on time of day, etc. I could manually fiddle with the monitor OSD, but that's a huge PITA compared to how all the monitors currently all work together in unison. Currently adjusting brightness is as simple as hovering over the TwinkleTray icon & scrolling the mouse wheel.
DELL-Chris M
Community Manager
•
56891 Posts
•
232143 Points
0
0
Posted February 19th, 2024 22:29
DDM 1.56.2110 was the last version tested for those older monitors.
To be clear, from that single RTX 4090 you are trying to run four monitors? The 10 year old U3014 2560x1600 and three 11 year old U2713HM 2560x1440?
What is driving this? CPU, Amount of system RAM, operating system, etc.
Forget MST daisy chaining and try this =
RTX 4090 HDMI out --> U3014 HDMI in
RTX 4090 DP #1 out --> #1 U2713HM DP in
RTX 4090 DP #2 out --> #2 U2713HM DP in
RTX 4090 DP #3 out --> #3 U2713HM DP in
DELL-Chris M (old account)
#IWork4Dell