MatCauthon

updated

3 months ago

M

MatCauthon

1 Rookie

•

1 Message

•

2 Points

1

3389

February 26th, 2025 22:27

U2722DE, constant USB connect/disconnect sound on Windows

I recently had the following frustrating problem. I managed to solve it myself, so I'm posting my experience here so someone can hopefully benefit from it in the future by finding this thread through search. 

For some reason, my laptop (ASUS Zenbook with Windows 11) started making the USB device connection sound, immediately followed by the USB device disconnection sound, every 30 seconds. This was happening constantly. Reviewing Windows's Event Viewer > Windows Logs > System showed that a device was constantly being plugged in and unplugged, causing the issue. The source was listed as "nhi", which didn't narrow down the device or driver causing this. 

I researched a lot online, most advice pointed to disabling Windows' USB Selective Suspend setting. The problem didn't go away even after doing that (it's difficult to do on Windows 11 - you have to use a terminal command, as the system-wide USB Selective Suspend setting was removed from Windows's Power Options). 

After pulling my hair out of frustration, I then started disconnecting devices from my laptop to narrow down the issue. It turned out the issue was with my Dell U2722DE monitor. Having the monitor plugged in via USB-C, even with no other peripherals connected via the monitor's ports, was causing the constant connect/disconnect sound.

I was already on the latest firmware for the monitor, version M3T107, having updated the firmware recently (I have a suspicion the firmware update might've caused this in the first place). There's no way to rollback the firmware to the factory version, so I tried reinstalling the M3T107 firmware, strictly following the instructions this time. This didn't make a difference - the issue was still present.

Finally I tried the "Factory Reset" option from the monitor's on-screen menu.



After the Factory Reset, the problem went away! Fingers crossed it doesn't return. Hope this helps others as well, as I didn't find this online anywhere! 

(edited)

  • Quantifier

    1 Rookie

    •

    1 Message

    •

    2 Points

    0

    1

    Posted March 4th, 2025 15:17

    I just wanted to say, THANK YOU for posting this. I have a similar model to your monitor (also 27” but U2723QE) and the screen started showing the USB-C connected and disconnected message non-stop out of the blue. Doing the factory reset did the trick for me.

    Thanks for taking the time to post your solution!

  • lewisjack99

    1 Rookie

    •

    1 Message

    •

    2 Points

    0

    0

    Posted August 25th, 2025 19:53

    I have had this issue on my machine but this didn't fix it. Any other guidance for what to try?

  • koohf1b2f8

    1 Rookie

    •

    1 Message

    •

    2 Points

    0

    0

    Posted January 5th, 2026 15:01

    After factory reset didn't fixed the issue, but when disconnecting the Display Port from the docker the sounds stops, not sure what really the issue is.

  • Rico Roodenburg

    1 Rookie

    •

    10 Posts

    •

    5 Points

    0

    1

    Posted January 13th, 2026 07:59

    We’ve got the same issue with our Dell Pro 14 Plus laptops in combination with the Dell P2422HE monitors. As far as I know, the factory reset didn’t help.

  • Rico Roodenburg

    1 Rookie

    •

    10 Posts

    •

    5 Points

    1

    0

    Posted January 14th, 2026 07:49

    @Rico Roodenburg​ also with the P2525HE and C2422HE.

  • jetcore

    1 Rookie

    •

    2 Posts

    •

    8 Points

    0

    0

    Posted August 10th, 2026 12:12

    Same happens with DELL S2725QC (on a Windows 11 laptop connected via USB C)
    In addition I had a regularily recurring system pop-up claiming that "the last added USB Device was not recognized".

    Current workaround: 
    In the monitor's settings I changed Display -> USB-C Prioritization from "High data speed" to "High resolution"
    According to the monitor this (re)set the USB protocol tu USB 2.0 

    This stopped both the "USB connection chime" and the warning pop up from happening.
    Re-Setting to "High data speed" re-introduced the recurring pop-up yet the chime did not come back.

    Did not work for me: "Factory reset" on the moniotor, Laptop reboot.
    Did not test: Resetting the screen's usb-hub within the device manager of windows.


    (edited)

    Is Good Troubleshooting
  • jetcore

    1 Rookie

    •

    2 Posts

    •

    8 Points

    0

    0

    Posted August 11th, 2026 05:25

    Important addendum: At least in my case, this really seems to be a USB bandwith and/or USB cable quality problem:

    After consulting with a bot, I reversed the usb-c cable which stopped the problem even when the monitor is set to  "USB-C Prioritization: High data speed". 

    Yes, cable orientation should not matter, with cheap or otherwise asymmetric cables it does.
    So if your problem randomly appears and disappears, it might just be a weak or bad cable.

    Note: I use the original usb-c cable provided with the monitor.

    (edited)