
UNSOLVED
U2421E, stops working on MacBook Pro, partially solved
I'm posting this in case others run into the same issue I did, so they know how to solve it.
Activating MST via the monitor menu or plugging into the DisplayPort output prevents a U2421E from recognizing USB-C or DisplayPort inputs until a factory reset is performed. To perform a factory reset, you have to connect via HDMI to access the monitor menu.
I got a new Dell U2421E monitor last week. It worked when I initially plugged it in to test. I then proceeded to finish adding it into my setup, which included connected it via DisplayPort to daisy chain it to a second monitor (a Dell U2412M). When I tried turning it on afterwards, it stopped working.
After 2 hours of trying different things, I was able to determine that there is a bug in the firmware for the U2421E monitor that causes it to stop recognizing either USB-C or DisplayPort input when the MST multi-stream feature is enabled. This occurs either when you specifically activate MST using the monitor menu OR when you plug in a DisplayPort cable into the output / daisy chain port.
Once this mode is activated, the monitor no longer recognizes input from either USB-C or DisplayPort from a MacBook Pro 16" (possibly from other devices, but that's the only one I tested with).
To get the monitor to recognize input again, you need to connect an HDMI input source, so you can access the main monitor menu, the reset the monitor to factory settings.
Unfortunately, the main monitor menu is not accessible until the monitor is displaying an input. Until then, it only shows the input connection menu. This is a problem that should be fixed by Dell, since it prevents accessing features unrelated to the input source, such as the factory reset. And it makes solving this issue harder, since you need to connect to HDMI to fix a problem with a USB-C or DisplayPort connection.
1 person also has this problem
Responses (1)
Solutions (0)

rvallejo
1 Rookie
•
1 Message
•
5 Points
1
0
Posted August 19th, 2026 17:42
It's 2026 and this is the first post I came across pointing to a factory reset restoring my USB-C signal between my U2421E Dell monitor and my A2141 16" MacBook Pro.
My monitor was working fine until I attempted to daisy chain a second U2421E via Display Port (MBP > USB-C/Thunderbolt 3 Cable > U2421E > Display Port Cable > U2421E). After that, USB-C would charge my laptop from the monitor, and the monitor would detect whenever I plugged/unplugged the cable but always gave me a "no signal" message whether I was using USB-C or a Display Port connection. HDMI continued to work without issue.
Tried every reset/cache clear I could to no avail. Different USB-C ports and cable, changing to Display Port, with and without a hub, repeated power downs/hard resets, deleting display cache, resetting NVRAM. HDMI worked on the affected monitor, and the second monitor worked fine in all configurations in place of the affected monitor. Did not get around to trying a second computer before I found this. I also spent probably a couple hours looking for solutions, finding many across various websites, forums and blogs that failed to fix the issue. Monitor works again, but have not tried daisy chaining again and cannot find a means of manually updating firmware to see if anything has been fixed.
TLDR; Connect via HDMI in order to access factory reset option using the monitor's joystick, then reconnect via USB-C.