UNSOLVED

sundaymtn

updated

2 years ago

S

sundaymtn

1 Rookie

•

6 Posts

•

2 Points

0

224

July 3rd, 2024 13:19

P2723QE, Latitude 5530, DDM 2.3 not launching properly

P2723QE monitor and Dell Latitude 5530 laptop. A few months ago the DDM stopped launching properly. The problem occurred on Windows 10 and persists on Windows 11 after recent upgrade.

  • As admin and regular user, I tried un/reinstalling both 2.3 versions listed here
  • Double clicking DDM.exe shows Display Manager in Task Manager for a couple seconds and then it disappears
  • Starting DDM.exe from command line behaves the same as double click. No additional output is shown on console
  • No errors appear in the install.log (DDM.exe does not launch following installation either)

What else can I try here? I can't find and exit code/message anywhere.

Thanks,

Seth

(edited)

  • sundaymtn

    1 Rookie

    •

    6 Posts

    •

    2 Points

    0

    1

    Posted July 3rd, 2024 14:05

    also tried to interact at the CLI level

    >"C:\Program Files\Dell\Dell Display Manager 2\DDM.exe" /console start

    >"C:\Program Files\Dell\Dell Display Manager 2\DDM.exe" /log

    >"C:\Program Files\Dell\Dell Display Manager 2\DDM.exe" /displaymodel

    >"C:\Program Files\Dell\Dell Display Manager 2\DDM.exe" /writeloglevel

    no visible response from any of these commands

  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    0

    1

    Posted July 3rd, 2024 15:29

    How are these two connecting to each other using what cable and ports? Did you uninstall and go back to DDM 2.2.0.43 and retest?

    (edited)


    DELL-Chris M (old account)

    #IWork4Dell

  • sundaymtn

    1 Rookie

    •

    6 Posts

    •

    2 Points

    0

    1

    Posted July 3rd, 2024 16:11

    They are connected using a USB-C cable only. There are two USB-C ports on the Latitude 5530 and I've tried them both. I just tried going back (uninstalling first) to 2.2.0.43 and the behavior is the same; I can see DDM for about 1 second in Task Manager and then it disappears.

    I guess it could be something is detecting and ending the DDM process. I will follow up with local IT (this is a work machine) to see if this software needs to be approved somewhere. That possibility would make sense, considering it just stopped working a couple months ago.

  • sundaymtn

    1 Rookie

    •

    6 Posts

    •

    2 Points

    0

    1

    Posted July 3rd, 2024 18:42

    IT says no monitoring they have would kill a process, just reports violations. I made my way into the Windows event log and found this:

    Application: DDM.exe
    CoreCLR Version: 6.0.3124.26714
    .NET Version: 6.0.31
    Description: The process was terminated due to an unhandled exception.
    Exception Info: System.Exception: C:\Program Files\Dell\Dell Display Manager 2\Newtonsoft.Json.dll is not signed with trusted CA
       at DDM2._0_UX.App..ctor()
       at DDM2._0_UX.App.Main()

    An expired certificate would also line up with it abruptly stopping recently

  • sundaymtn

    1 Rookie

    •

    6 Posts

    •

    2 Points

    0

    1

    Posted July 8th, 2024 15:12

    The untrusted cert issue has various posts on the web suggesting manual installation work-arounds. Since that isn't the best choice for a work machine, I found that reverting all the way back to 2.1.0.45 seems to work.

    At some point recently there was an auto-update and that broke things for me. It's entirely possible that I opted to update the Display Manager and didn't notice it stopped working until later since I do not use it every day.

    Either way - there's something wrong with the certificates in versions >2.1.0.45

  • TheGipper

    1 Rookie

    •

    1 Message

    •

    2 Points

    0

    0

    Posted November 27th, 2024 21:10

    I am having the same problem on my work computer.  I call install, but not run DDM because the ddm.dll is not signed. 

    I can use the older version provided and it will run, but it does not have the KVM features I need.

    Initially I installed DDM version 2.3.x.  But it would not launch.  I see that the security policies prevented the launch of the application (and rightfully so) because the DLL was not signed.

    I can successfully run 2.1.0.45, but again it does not have the KVM features.

    (edited)

  • sundaymtn

    1 Rookie

    •

    6 Posts

    •

    2 Points

    0

    0

    Posted March 11th, 2025 21:05

    Happened to me again. IT pushed a windows update which finds a newer version of DDM. I again reverted back to 2.1.045 (still had it in Downloads). This time I went into DDM and clicked the little gear for the Apps "Update" settings. There I UNchecked "Automatically notify when update is available", maybe that will keep it out of the drag net of window's update-all.

    (edited)