UNSOLVED

brkenkeybard

updated

2 years ago

B

brkenkeybard

1 Rookie

•

2 Posts

•

2 Points

0

528

March 15th, 2025 16:54

P2723DE, USB-C Daisy Chain, MST limitations?

I have 3 of the P2723DE monitors in a daisy chain over USBC. The x3 1440p displays combined bandwidth is within the DP1.4 spec, and I have had multiple Dell and CDW reps tell me that the config would be supported. However, it seems that when running the daisy chain, I can only get 2 at full 1440p 60hz RGB 4:4:4. As soon as the 3rd is in the chain, all resolutions drop to 1920x1200.

The only way I can manage to get all 3 at 1440p 60hz is to drop the pixel format from RGB 4:4:4 to YCbCr 4:2:2, which makes certain text blurry. Since YCbCr 4:2:2 (~3.75Gbps per screen) used less bandwidth than RGB 4:4:4 (~5.63Gbps per screen) it made me look into how many DP lanes were being utilized over USBC.

My laptops (tested with a 2024 Lenovo P14s and 2024 HP Envy) shows only 2 DisplayPort lanes are being utilized instead of the full 4 when connected to the P2723DE. I set all three of my P2723DE monitors to use "High Resolution" and "MST On".

The P2723DE manual specifies the monitors support DSC HBR3 as well, which would put the total bandwidth at ~15.93Gbps uncompressed or DSC at ~5.97Gbps, both which 4-lane DisplayPort can handle. 

Is 2x DP lanes over USBC a limitation of the monitors? 

(edited)

  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    0

    0

    Posted March 15th, 2025 19:47

    The online P2723DE User's Guide page 42 only shows two P2723DE under USB-C MST daisy chain =



    But, the implication of the note means more can be added. Try this and let me know if it makes a difference =

    * In the 1st/2nd P2723DE, open the Main Menu (page 57)
    * Go to Display --> USB-C Prioritization (page 66)
    * Set both 1st/2nd P2723DE to USB-C Prioritization = High Resolution
    * Exit the Main Menu
    * Does the 3rd P2723DE now work at 2560x1440 60Hz?


    DELL-Chris M (old account)

    #IWork4Dell

  • brkenkeybard

    1 Rookie

    •

    2 Posts

    •

    2 Points

    0

    0

    Posted March 16th, 2025 14:50

    All 3 monitors in the chain have USB-C Prioritization = High Resolution, but still not able to get the third monitor at full 1440p resolution.