UNSOLVED

gurmukhp

updated

2 years ago

Closed

G

gurmukhp

1 Rookie

•

6 Posts

0

39271

October 27th, 2015 07:00

P2715Q, slows down my MacBook Pro

I have a Macbook Pro 2.2ghz i7 with 16GB of ram connected to my Dell P2715Q via displayport. For some reason whenever I use the monitor, the computer slows down a LOT. Animations on browsers are choppy, scrolling is choppy and the fan is constantly on in activity monitor.

If I disconnect the monitor and use just the laptop display, everything works as expected.

Is the laptop not powerful enough or have I missed a setting somewhere?

Thanks!

(edited)

  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    2303

    0

    Posted October 27th, 2015 08:00

    It could be the 60Hz versus 30Hz.

    * Open the monitor OSD (On Screen Display) -Display
    * Change MST to Primary (4k2k 3840x2160 30Hz)

    If the slow down does not happen with this setting, then the culprit is something in the apple.


    DELL-Chris M (old account)

    #IWork4Dell

  • gurmukhp

    1 Rookie

    •

    6 Posts

    2303

    0

    Posted October 27th, 2015 08:00

    I'm told that no valid MST signal is found?

  • gurmukhp

    1 Rookie

    •

    6 Posts

    2303

    0

    Posted October 27th, 2015 08:00

    Thanks for this, I just did that and now the monitor has gone blank and I'm unable to wake it.

    I am also unable to show the OSD as it only allows me the option to choose between DP, mdp and HDMI.

    Help?!

  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    2303

    0

    Posted October 27th, 2015 09:00

    Press any monitor button. The input source menu will appear with a check on the port you were using. Press the green check mark (√) button for about 8 seconds. What appears? Do you have the ability to switch the MST option back to Off?


    DELL-Chris M (old account)

    #IWork4Dell

  • gurmukhp

    1 Rookie

    •

    6 Posts

    2303

    0

    Posted October 27th, 2015 10:00

    I have managed to change the MST value back to off. Is this something the Macbook should support?

  • gurmukhp

    1 Rookie

    •

    6 Posts

    2303

    0

    Posted October 27th, 2015 11:00

    I've managed to get it back, but it tells me that no valid MST signal is found?

  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    2303

    0

    Posted October 28th, 2015 09:00

    This is the first report I have seen of this issue. Unfortunately, Dell does not test/validate this monitor model on Apple hardware, ports, and software. Is there a non-Apple computer to test the monitor on? You might want to post on the Apple Forum to see if they can assist.


    DELL-Chris M (old account)

    #IWork4Dell

  • gurmukhp

    1 Rookie

    •

    6 Posts

    2303

    0

    Posted October 28th, 2015 11:00

    Thanks for this. Unfortunately, having a look on the Apple site a *lot* of people are having the same issue. It's a huge disappointment especially since this screen is meant to be the best.

  • miq9ko

    1 Message

    2303

    0

    Posted March 18th, 2016 10:00

    Hi Exactly the same problem. I have early 2015 rMBP 13'' and computer slows down considerably when connected to dell P2715Q? Any solution yet? Best Mihkel