UNSOLVED

Bad-Dad

updated

11 months ago

BD

Bad-Dad

1 Rookie

•

6 Posts

•

4 Points

0

258

December 16th, 2025 09:46

P2422HE, P2422H, MST daisy chain, flickering second monitor

We have about 16 desks with P2422HE monitors connected to a second P2422H using supplied Dell DP cables.

The P2422HE #6 DP out port feeds the P2422H #5 DP in port.



Laptops are connected from the USB-C port to the P2422HE #7 USB Type-C upstream port and a typically Dell Latitute or Lenovo ThinkPads.

The setup works fine, except we get brief flickering on the second monitor (the P2422H).

This occurs with Lenovo and Dell laptops.

Also occurs when using Windows or Linux.

(edited)

  • DELL-ChrisM2

    Community Manager

    •

    1993 Posts

    •

    10000 Points

    0

    0

    Posted December 16th, 2025 13:04

    Good post! Your setups are correct. I added the picture.

    On the P2422HE, open the Menu--> Others. Check the firmware version. Is it Mxx209 or newer?

    On the Laptops, are you testing on battery only or with the Laptops AC power adapter connected?

     

    #IWork4Dell

  • Bad-Dad

    1 Rookie

    •

    6 Posts

    •

    4 Points

    0

    0

    Posted December 16th, 2025 14:23

    The firmware on the P2422HE is version M2B208 - I'll try an update.

    They are always AC powered, as the P2422HE provides power over the USB-C connection.

  • DELL-ChrisM2

    Community Manager

    •

    1993 Posts

    •

    10000 Points

    0

    0

    Posted December 16th, 2025 14:28

    "as the P2422HE provides power over the USB-C connection"

    Agreed. The P2422HE #7 USB Type-C upstream port does provide power delivery of 65W back to Laptop. But for troubleshooting, also connect the provided AC power adapter to the Laptop. Then retest.

     

    #IWork4Dell

  • Bad-Dad

    1 Rookie

    •

    6 Posts

    •

    4 Points

    0

    0

    Posted December 16th, 2025 14:41

    @DELL-ChrisM2​ 

    Ok, I've updated the firmware from M2B208 to M2B209, disconnected everything and then plugged it all back in again.

    I've also plugged a USB-C PSU into the laptop I'm using, before connecting the P2422HE.

    However I still get the flicker on the second monitor.

    Some more information,

    The second monitor it detected correct and the image is stable and clear.

    However approximately every 3 to 9 seconds there is a brief flicker in the displayed image, less than a second in duration.

  • DELL-ChrisM2

    Community Manager

    •

    1993 Posts

    •

    10000 Points

    0

    0

    Posted December 16th, 2025 15:02

    If you remove the P2422H as the secondary monitor and replace it with any other monitor (another P2422HE or any Dell monitor) with DP in port, does the other secondary monitor flicker?

    (edited)

     

    #IWork4Dell

  • Bad-Dad

    1 Rookie

    •

    6 Posts

    •

    4 Points

    0

    0

    Posted December 16th, 2025 15:15

    Ok, that is different, I've plugged in an old HP monitor I found (ZR2240w).

    The HP monitor is showing no flickering as yet, I'll try another Dell monitor.

    Notably I used the same power and DisplayPort cables.

    Also the resolution is still the same as the original Dell monitor.

  • Bad-Dad

    1 Rookie

    •

    6 Posts

    •

    4 Points

    0

    0

    Posted December 16th, 2025 15:38

    Have just plugged in a Dell P2417H and a Dell P2421, they both show no flicker either.

    Just to double check I've plugged in the original P2422H and the flicker is apparent within a few seconds.

  • DELL-ChrisM2

    Community Manager

    •

    1993 Posts

    •

    10000 Points

    0

    0

    Posted December 16th, 2025 15:44

    Based on the results of your good troubleshooting, the fault is with the P2422H. Go HERE to check their warranty status.

     

    #IWork4Dell

  • Bad-Dad

    1 Rookie

    •

    6 Posts

    •

    4 Points

    0

    0

    Posted December 16th, 2025 16:53

    I tried one more thing. I've plugged the P2422H into a HDMI port on laptop directly and it is fine with no flicker.

    Also if I plug in some machines, such as a Lenovo Think Pad L series (Gen 5) I don't see flickering.

    This might be a clue, as they seem to have slightly different specs on the USB-C ports.

    I'll post again when I find out more...

    (edited)