P2422HE, Mxx209 fails with "Firmware update was not completed"
Greetings,
I was trying to update my DELL P2422HE from the current M3C101 firmware to Mxx209 using the firmware <ADMIN NOTE: Broken link has been removed from this post by Dell>
The update though did not succeed; The process runs for a few minutes, then the monitor restarts and "Firmware update was not completed. Please update the monitor firmware again" message is displayed while the update app says that the update succeeded (it's not).
The monitor is connected to the laptop running Windows 11 Pro 24H2 (26100.4061) using Type-C - Type-C cable. LAN cable and USB peripherals disconnected from the monitor. I tried that multiple times with the same result; tried monitor factory reset. Every time the monitor is turned on now, this message displayed. I read topic on this forum, update FAQ but there is nothing useful. Please help solving the issue.
Thanks for the response @DELL-Chris M. Yes, i did all these steps. Clean Windows start with no apps running, monitor factory reset, re-enabled DDC/CI setting just in case. Still "Firmware update was not completed" during monitor start. The program, however, indicates successful installation, but when reopen it shows the old firmware version.
* Turn the P2422HE off * Disconnect the power cable and USB-C cable from the P2422HE * Press and hold the power button for 8 seconds * Reconnect the power cable and USB-C cable to the P2422HE * Turn the P2422HE on * Enter the Menu- Others * Does it still list Firmware as M3C101? If yes, try to install M3C209 one more time
@DELL-Chris M That did not help. Tried another update, it took only a few mins, and still the same result. "Firmware update was not completed" is still displayed during monitor start.
Then your only option to get a P2422HE with the latest firmware is via a P2422HE exchange.
Dell GHN (Get Help Now) chat support must verify the ownership and warranty status. Click the blue "Get Help Now" on the right to start a private live chat session. Share the private P2422HE Service Tag and all of your troubleshooting with them.
OleksandrB was able to install firmware M3C210. Try these instructions =
* All USB peripheral devices should be disconnected from the monitor (mouse, keyboard, storage, etc.)
* If your monitor has a built-in webcam, close the webcam shutter or on some you press the webcam closed into the monitor chassis
* Download/save the monitor firmware directly to the computer desktop
* Close/end task all unnecessary software applications (Browsers, Dell SupportAssist, Dell Update Application, Dell Display Manager, Dell Display and Peripheral Manager, Dell Color Management, Steam, Anti-virus, etc.)
* Open the Monitor OSD Menu * Go to Others * Go to Factory Reset and run it * Look for DDC/CI and make sure it is set to On * Exit the Menu
* Right click the firmware update file that you saved on the computer desktop * Click "Run as administrator" * Follow the prompts * When asked, restart the computer
Once/if the monitor firmware update is done and the computer has restarted, do the following steps = * Turn the monitor off * Disconnect the power cable, all video cables, and all peripheral devices from the monitor. Wait 5 seconds * Reconnect the power cable and video cable to the monitor * Turn the monitor on * Go to Menu--> Others and check the firmware version
OleksandrB
1 Rookie
•
5 Posts
•
20 Points
0
0
Posted July 29th, 2026 21:40
I can confirm this issue is solved with the latest 210 firmware. I was able to successfully update monitor.