Firmware update was not completed properly. Please update the monitor firmware again.
What I tried already:
Connected using USB-C
Connected using USB-A to USB-C
Windows 10 Desktop PC
Windows 10 Laptop
Windows 11 Laptop
macOS Macbook Pro
Firmware tool detects the monitor and firmware version and starts updating. After a while, the monitor automaticallty restarts, showing the Dell logo and then the message.
I have the same problem and tried the same solutions, multiple devices, multiple cable, same result every time. Also tried factory resetting the monitor with no joy.
I also tried the Dell Monitor utility which has the ability to update monitor firmware and works fine updating my P2423DE's in the office. Still fails on the P2422HE at home.
Found a slightly older firmware version (Mxx207) and that worked fine. Soon as I try to update from that to 209, fails again but reverts right back to firmware 101 again strangely. Seems ironic that 209 is supposed to fix a problem with FW updating....
Ah thanks for this link. I was looking for some sort of archive with older firmware to do a staged update. But since you mention that updating to 209 fails again, I will leave it at 207 :-) At least that annoying message is gone when firing up the monitor.
Quick update. Was also able to update to 208 using a MacBook. For some reason this firmware version is not available as a Windows package... But if you have an archiving tool like 7zip you can probably extract this package on a Windows PC and use the firmware updater of 207 or 209 to send the firmware file (UPG file) found in there to your monitor :-)
Hello everyone,We also have this problem, we cannot update the firmware on some devices.
With monitors with firmware status M3C203, it may happen that the update is terminated with a message that the update was not successful. The reason for this is not yet known. If the Mxx209 cannot be installed, the message is installed after the monitor is rebooted, the firmware is back to M3C203.
During January 2025 a Windows update caused the camera to stop working, and the firmware update being installed. One solution was to roll back the windows update, and then install the firmware.
Simon.Brockbank
1 Rookie
•
1 Message
•
2 Points
0
2
Posted November 11th, 2024 16:04
I have the same problem and tried the same solutions, multiple devices, multiple cable, same result every time. Also tried factory resetting the monitor with no joy.
I also tried the Dell Monitor utility which has the ability to update monitor firmware and works fine updating my P2423DE's in the office. Still fails on the P2422HE at home.
Found a slightly older firmware version (Mxx207) and that worked fine. Soon as I try to update from that to 209, fails again but reverts right back to firmware 101 again strangely. Seems ironic that 209 is supposed to fix a problem with FW updating....
Anyway, link to 207 below
P2422HE Mxx207 ISP FW Release
(edited)