UNSOLVED

itsmemrmule

updated

2 years ago

I

itsmemrmule

1 Rookie

•

9 Posts

•

2 Points

0

261

November 29th, 2024 15:57

P1424H, slow charging to Laptop

When I use the 'charge through' feature on my Dell P1424H portable monitor (power into the monitor > laptop) =



I get the error that it is a "Weak Charging State - please use the charger that come with the device.".

I use this configuration as I use an external USB-C external drive constantly.

I have updated my system to the latest BIOS and still receive this error message.

I have installed the drivers for the Dell P1424H.

Any advice would be awesome

thank you

(edited)

  • ejn63

    12 Elder

    •

    31864 Posts

    •

    156337 Points

    0

    0

    Posted November 29th, 2024 17:34

    What are you using to power the monitor?  If it's a single USB input from a system, it's unlikely there is sufficient power to pass through to another device.

  • itsmemrmule

    1 Rookie

    •

    9 Posts

    •

    2 Points

    0

    0

    Posted December 3rd, 2024 19:45

    @ejn63​ I use the power block and cable that came with my Dell Laptop

  • ejn63

    12 Elder

    •

    31864 Posts

    •

    156337 Points

    0

    0

    Posted December 3rd, 2024 20:04

    Directly to the monitor, or to the PC and then a single USB connection to the display?  If the latter, it's unlikely there is sufficient power for the external drive - a single USB connection may be able to power the monitor without issue, but nothing else.

  • itsmemrmule

    1 Rookie

    •

    9 Posts

    •

    2 Points

    0

    0

    Posted December 3rd, 2024 20:26

    @ejn63​

    Directly into the monitor. As I use the 2nd USB port on my laptop for an external drive. So I can't power the laptop and then power thru to the monitor unfortunately

    Current configuration is:

    Power - monitor - laptop - drive

    If I do:

    Power - laptop - monitor

    I don't get an error, but then I can't use my external USB drive.

  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    0

    0

    Posted December 3rd, 2024 21:57

    The P1424H maximum power pass-through is 65 W. See P1424H User's Guide pages 20/21.


    DELL-Chris M (old account)

    #IWork4Dell

  • itsmemrmule

    1 Rookie

    •

    9 Posts

    •

    2 Points

    0

    0

    Posted December 4th, 2024 13:46

    @DELL-Chris M​ OK, but the laptop charger is 45W, so the 65w max pass thru should be enough

  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    0

    0

    Posted December 4th, 2024 13:55

    Your testing has proven that 65w is not enough for the added drive.

    Error =

    Power - monitor - laptop - drive

    No error =

    Power - laptop - monitor


    DELL-Chris M (old account)

    #IWork4Dell

  • itsmemrmule

    1 Rookie

    •

    9 Posts

    •

    2 Points

    0

    0

    Posted December 4th, 2024 13:59

    @DELL-Chris M
    When I use this configuration (page 20 from the manual) I get the low power error

  • itsmemrmule

    1 Rookie

    •

    9 Posts

    •

    2 Points

    0

    0

    Posted December 4th, 2024 14:03

    OK and now I see that 

    When you connect the 45 W adapter, a maximum of up to 30 W is supported
    through the power pass-through.

    So the charger that came with my laptop is the issue. As I should now have to change it to 65 W. But how will this work when I don't use the extra monitor?.. Can I use a 65 W adapter for my 45 W laptop?

    I don't think this was very well thought through

  • itsmemrmule

    1 Rookie

    •

    9 Posts

    •

    2 Points

    0

    0

    Posted December 4th, 2024 14:05

    @DELL-Chris M​ 

    No, that is not the case I just can't add the drive in the 2nd config as there are only 2 USBC ports