UNSOLVED

hh777

updated

22 years ago

H

hh777

5 Posts

0

21228

March 9th, 2005 02:00

external monitor for laptop

I purchased a 2005FPW external monitor for my Inspiron 600m laptop in order to be able to view two web or text pages side by side comfortably. I have two problems with this new monitor.

1. I downloaded the driver upgrade for the monitor from Dell but got an error message that it was unable to load. As a result I was unable to view the monitor at higher than 1280 by 1024 resolution.
2. At this resolution, the display was not sharp and appeared to be distorted so that words and images appeared to be stretched out from side to side.

Would I be better off with a Dell 2001FP monitor, since this monitor does not require a single resolution the way that the 2005FPW does? Would I lose the side by side display capability that the wide screen offers if I switch to the 2001FP instead?

Is the wide view distortion simply a correctible problem that is a function of having the incorrect monitor driver?
  • Jesse L (retired)

    10 Wizard

    •

    17898 Posts

    •

    69016 Points

    516

    0

    Posted March 9th, 2005 15:00

    hh77,

    Thank you for using the Dell Community Forum.

    The monitor is cable of attaining the 1280x1024 setting but, your video card will only allow you the max setting of 1024x768.

     

    Jesse L (retired)

  • hh777

    5 Posts

    516

    0

    Posted March 9th, 2005 23:00

    Is there a way to upgrade the video card in my inspiron 600m so that it can drive the 2005FPW at optimal resolution of 1680 by 1050
  • ptn98

    25 Posts

    516

    0

    Posted March 10th, 2005 00:00

    I don't think your laptop's video card is upgradable. Most are not accept for the new XPS Gen2 and 9300. You really want to run that monitor with a desktop.
  • TimothyBH

    127 Posts

    516

    0

    Posted March 10th, 2005 05:00

    I had tried my 2005fpw on my Gateway 7405gx, which has an ATI 9600 mobile graphics chip. It was able to do the 1680*1050. Though, the laptop's screen is widescreen and that probably meant the drivers it had would likely be compatible with another widescreen.

    Is your laptop widescreen?

    Also, if you can get to 1280*1024, can you set it lower for 1280*800? That res is the correct aspect ratio for a widescreen, so even though it still has to scale to fit your 2005fpw it will at least keep things from looking squished.

    Are you only using the 2005fpw for this laptop? Maybe get a 17 or 19inch screen that runs at 1280*1024, which is plenty enough for browsing the internet.

    On the driver dl for the monitor, how did you go about installing it? Double clicking any of the files you dl won't work.

    Here are some steps:

    You should go into display properties (in control panels), when in it choose the last tab called "Settings." Select the monitor with the number 2 for the 2005fpw, just like how you would to change the resolution. But after selecting it click the advance button. From the new window select the monitor tab. The first thing should say Monitor Type and show either something like "Plug and play Monitor" or "2005fpw (Analog)" if the drivers are installed. It shows Analog when connecting the screen using a blue vga port, digital is for the white DVI port.

    So if it doesn't say the name of the screen, but some generic, click the properties button below, then in the new window the driver tab. Click update driver.

    The following steps are under the latest versions of Win XP. In the new window click "No, not this time" and click next. Click the 2nd option to install from a list or location and next.

    Select don't searh, you will choose option and next.

    Here it will show a list of compatible options, most likely what it's already using.

    Click the "have disk" button.

    Then click the browse button. Now find where you unzipped the new driver you dled. If you did the default location it's probably a folder called "Dell" at the first level on the C drive. Keep going through the folders in the Dell folder until you find a file called something like 2005fpw.ini, click it and hit open.

    Now you should see too options, something like 2005fpw analog or digital. Select analog if you are using the vga cable, which is the blue tipped cable and connector. Don't choose digital as I highly doubt you have a DVI connection on a laptop, which is white.

    Okay after doing this it should show what you selected under monitor type now. Restart just for good measures, hopefully the laptop will remember this. If you want, check to see if the resolution options changed before restarting.

    I hope this helps.

    Message Edited by TimothyBH on 03-10-2005 01:55 AM

  • hh777

    5 Posts

    516

    0

    Posted March 10th, 2005 13:00

    Thanks for the advice. It turns out that the video card in this laptop is not able to run the 2005FPW. I connected it to my Dell desktop instead and it runs great after downloading a driver update directly from Nvidia.

    Any suggestions on the best settings to use so that I can decrease the eyestrain I get from the brightness of the screen on default settings? I have been trying to adjust the settings for the gamma, contrast and brightness but cannot seem to figure out the best way to blend these settings along with contrast and brightness settings on the monitor itself.
  • TimothyBH

    127 Posts

    516

    0

    Posted March 10th, 2005 19:00

    I seem to like lowering the gamma from 1.0 to atleast 0.8, which makes it look less washed out. Then I Lower the brightness down to 50% on the monitor, but currently it's at 0% since I often use my computer at night in the dark. I don't mess with contrast much, increasing it could easily blowout similar greys, like part of windows and control panels.
  • jakemtl

    6 Posts

    516

    0

    Posted March 15th, 2005 02:00

    I am confused by this post which I stumbled upon by accident.

    I just ordered the 2005FPW in order to run it on my Dell Inspiron 600m. I checked into the video card compatibility on Dell's web site by looking at this page - http://www1.us.dell.com/content/learnmore/learnmore.aspx?c=us&l=en&ref=CFG&s=gen&~id=monitors&~line=desktops&~lt=popup&~series=optix&~tab=other

    THIS CLEARLY STATES COMPATIBILITY BETWEEN THE ATI MOBILITY RADEON 9000 FOUND IN THE 600M AND THE 2005FPW DISPLAY!

    In addition, the video driver released on 12/01/2004 from Dell states "added 1680x1050 as supported resolution for externally attached displays" - http://support.dell.com/support/downloads/format.aspx?c=us&cs=04&l=en&s=bsd&SystemID=LAT_PNT_PM_D600&os=WW1&osl=en&deviceid=3083&devlib=6&category=0&releaseid=R89636

    Am I missing something? Should I cancel my order? Please advise.

    Thank you.

    Message Edited by jakemtl on 03-14-2005 10:34 PM

    Message Edited by jakemtl on 03-14-2005 10:38 PM

  • hh777

    5 Posts

    516

    0

    Posted March 16th, 2005 01:00

    I have loaded the driver upgrade twice from Nvidia into my inspiron 600m and have been unable to use any higher than 1024 x 768 resolution with the laptop and the 2005 FPW.
  • jakemtl

    6 Posts

    516

    0

    Posted March 16th, 2005 11:00

    Sounds like we have different hardware.... I have a ATI Mobility Radeon 9000 in my 600m - not an Nvidia chip.