UNSOLVED

yili

updated

20 years ago

Y

yili

2 Posts

0

9162

August 30th, 2006 00:00

DELL-ChrisM... Scaling on 2407 with ATI 1950XTX

Dear ChrisM / Tech Support,
 
I have just received my 2407WFP (A02) today and in general I have no problem with it (the forum provided lots of advice on solving banding and other issues). However, I am still in shock that the monitor is unable to scale to 4:3 when I am playing a game at 1600x1200. I am sure the problem has been described as the option for "1:1, 4:3, full" is greyed out.
 
I am using a ATI 1950XTX graphics card and I have updated the latest driver and selected "use centered timing" under "image scaling", but that doesn't seem to work either. So I can't have my game running without been squashed up since both the hardware setting and software setting doesn't work.
 
Please advice on any solution, and if there is no solution, when (days, weeks, eh.. months) and how (user patch, return to factory etc.) will the solution be like.
 
Thank you.
  • Dufflover

    2 Intern

    •

    429 Posts

    709

    0

    Posted August 30th, 2006 00:00

    Yeh for some reason ATI AMD don't have the same scaling options as nVidia. I can suggest these options:
    - Play on the next 4:3 res down
    - Get an nVidia card (lol, obviously a bit extreme this one)
     
  • yili

    2 Posts

    709

    0

    Posted August 30th, 2006 01:00

    "Play on the next 4:3 res down"

    What do you mean? (sorry i am rather dumb...)
    The game I am playing, Warcraft 3, have only the following options:

    - (low res)
    - 1280x960 (ratio: 1.33)
    - 1280x1024 (ratio: 1.25)
    - 1600x1200 (ratio: 1.33)

    My 2407wfp @ 1920x1200 (ratio: 1.6)

    I couldn't find any lower resolution that has anything closer to the ratio of 1.6.

  • 709

    0

    Posted September 2nd, 2006 16:00

    He means the 4:3 and 1:1 options work on anything lower than 1600x1200, so you could play 1280x1024 and turn 1:1 for example.  Something I find unacceptable, which is why mine is going back for a 244T.
  • wlamee

    2 Posts

    709

    0

    Posted October 4th, 2006 20:00

    I just don't understand why the 1:1 option works fine for 1280*1024, 1024*768 and 800*600, and not for 1600*1200. What's the prob with 1600*1200? It should just be a full-res 1920*1200 screen with 160 pixel wide black bands on the left and right hand side.

    It is also irritating that the monitor does not remember your preferred aspect ratio per screen res, but that is (in my mind) second to the 1600*1200 simply not working in 1:1 and being stretched all over the display.

    I think all Dell needs to do is enable the 'Wide Mode' display setting in the monitor menu for 1600*1200, and then you can see 1600*1200 perfectly, pixel for pixel. FWIW, I'll try my bit to ask Dell to fix this or else send it back.

    wlamee