trogau

updated

1 year ago

T

trogau

1 Rookie

•

13 Posts

0

3661

July 19th, 2022 16:00

DA305 not reconnecting monitor via DisplayPort

Hi all,

I've finally gotten my hands on a DA305 USB-C hub after they've been out of stock for months. Unfortunately it seems to have a problem with the DisplayPort connector: if I unplug my laptop from the DA305, then plug it back in, the screen will not reconnect - it just displays no signal. 

If I unplug the monitor from the DA305 and plug it back in, it will start working again.

Note this only happens with the DisplayPort connector - HDMI works as expected.

I'm running an XPS15 and this is a Dell monitor (S2721DS).

I also have a DA300 unit which works as expected with DisplayPort. So this either appears to be a limitation of the DA305 (which makes it useless to me), or a defect in my specific unit.

Just wondering if anyone else has experienced a similar problem and/or has a fix. Thanks!

  • trogau

    1 Rookie

    •

    13 Posts

    1711

    0

    Posted August 23rd, 2022 14:00

    Update on this: the latest firmware almost has this one solved. I'd say it almost perfect but on occasion - maybe once a week or so - I have the problem where when plugged in it doesn't connect to the main monitor. Seems to be mostly on first boot in the morning, but then generally after that is fine.

    So it's gone from almost completely unusable (for my use case, anyway) to basically fine. I'm hoping there's still another firmware update on the horizon that might stomp out this last bug and then it will be as perfect as the DA300!

  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    1554

    0

    Posted July 19th, 2022 19:00

    Both the online DA305 Usage and Troubleshooting Guide and DA305 User's Guide, Troubleshooting section shows =

    Capture.JPG

    Which mirrors your issue. Based on that remark, it is a usage limitation.


    DELL-Chris M (old account)

    #IWork4Dell

  • trogau

    1 Rookie

    •

    13 Posts

    1552

    0

    Posted July 19th, 2022 22:00

    Sorry, I should have said specifically that I have already reviewed the troubleshooting section of the documentation and confirm that none of them apply.

    The section you have mentioned is if there is no video when connected. That is NOT the problem I am having.

    To clarify:

    • The video works fine when the monitor is first plugged in.
    • When the DA305 USB hub is unplugged from the laptop, and then plugged back in, the monitor does not pick up a video signal.
    • If the video cable is unplugged from the DA305 and then plugged back in, the signal comes back.

    I have since noticed another failure condition:

    • If the laptop goes to sleep mode and is awoken, the monitor will not come back on, and needs to be unplugged and re-plugged.

    Again, these problems do NOT occur with the DA300, which works as expected.

  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    1547

    0

    Posted July 20th, 2022 12:00

    "confirm that none of them apply" ?

    Both of those below are the problem of, "No Video on the monitor" =

    the monitor does not pick up a video signal
    the monitor will not come back on


    DELL-Chris M (old account)

    #IWork4Dell

  • trogau

    1 Rookie

    •

    13 Posts

    1544

    0

    Posted July 20th, 2022 15:00

    Are you saying that this is the intended design of this unit - that each time the computer goes into sleep mode or you unplug/replug the unit that you need to physically remove the video cable from the unit and plug it back in?!?

    It is functionally useless to me if this is how it works, and I cannot believe that this is the intended design. Why would the DA305 - a newer and more expensive version of the DA300 - have worse functionality than its predecessor?

  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    1503

    1

    Posted July 26th, 2022 06:00

    The dock team has asked for the following private information from you. Click the DELL-Cares username. On the resulting page, click "Send this user a private message" and share the following private data =

    DA305 Service Tag, 20 digit serial number
    S2721DS Service Tag, 20 digit serial number
    XPS 15 Service Tag

    There are eight XPS 15 models, so we need to know if you have installed the latest BIOS and Chipset drivers on your specific XPS 15? For the DA305, did you install the KX55K firmware update on your XPS 15?


    DELL-Chris M (old account)

    #IWork4Dell

  • trogau

    1 Rookie

    •

    13 Posts

    1493

    0

    Posted July 26th, 2022 17:00

    I haven't tried the  firmware update - just downloaded it and went to install it and Windows blocks it with the below warning:

    trogau_0-1658880565501.png

    Because I am a risk-taking masochist & I ran it anyway (after verifying the hashes match, but come on, surely it's not that hard to get these applications signed?).

    It looks like it might have fixed the issue, at least on my home set up (only difference is a BenQ monitor, not a Dell one). I'll try it in the office tomorrow & confirm. 

    Thanks for the info about the firmware update!

  • trogau

    1 Rookie

    •

    13 Posts

    1487

    0

    Posted July 26th, 2022 19:00

    Spoke too soon, unfortunately - I still have the same problem where if Windows sleeps the display (e.g., from turning monitor off for power saving), it won't come back online if I wake the machine.

    I'll re-test when I'm in the office tomorrow & send through the details requested by the dock team.

  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    1745

    0

    Posted July 29th, 2022 14:00

    Yesterday they released a new DA305 firmware, 3T6MD .

    Fixes & Enhancements
    1. Enhanced compatibility with monitors and USB devices.
    2. Enhanced compatibility with more notebooks.


    DELL-Chris M (old account)

    #IWork4Dell

  • trogau

    1 Rookie

    •

    13 Posts

    1333

    0

    Posted August 3rd, 2022 21:00

    Thanks.

    Been running this new firmware for a couple of days - it didn't seem to work immediately as I had problems almost straight away, but after a reboot it seems to be more reliable. I haven't had a dead screen since reinstalling it.

    I'm still a bit nervous to declare victory straight up yet but so far it is looking good. Not sure if my post was related to the team working on new firmware but if so, appreciate the rapid response to feedback. I'll continue testing in a few different configurations & report back if I find any more issues.

    (Not to nitpick, but: this new firmware /is/ digitally signed, so doesn't trigger the big ugly UAC warning in Windows. BUT, the signature is for some other totally random company (not Dell) so it is still a little weird to install.