I see the new 2407WFP-HC is available on the Dell US website. I'm hoping someone who has access to this new display could confirm that the 2407WFP-HC can properly handle 1080i over the component inputs? The lack of 1080i over component was the main reason I couldn't buy the older 2407WFP. Does 1:1 scaling also work properly?
The new users manual for the 2407WFP-HC indicates it should work, so I'm hopeful that this shortcoming has been fixed.
BTW, does the 2707WFP also handle 1080i properly over component?
Thanks for the info. Do you have a 2407WFP or a 2407WFP-HC? The 2407WFP-HC appears to be very different compared to the 2407WFP, not only in the type of panel but also in the way input signals are handled, based on the available documentation.
Please confirm that you have a 2407WFP-HC not a 2407WFP. Your firmware description sounded more like a 2407WFP (A04) than the newer panel, which is why I am asking.
sorry, no, these are 2407wfp. didn't see the diff til now. I still can't get anything over 720i via component. I bought these because they were supposed to be able to do it. Didn't find out til now that they can't and only did by reading on this forum.
Below are the modes we support on the
2407WFP and the 2407WFP-HC VGA 480p, 576p, 720p, 1080p
CMP to VGA 480p
DVI 480p, 576p, 720p, 1080p RGB only, not Y,Pb,Pr (the edoc is incorrect). NOTE some users report 1080i is possible if you turn iTest on in the service menu
HDMI to DVI 480p, 720p, 1080P (2407WFP Fill only A00, A01, A02, A03. Fill+1:1+Aspect A04)
CMP 480p, 576p, 720p
CPS 480i NTSC, 576i PAL
S-Vid 480i NTSC, 576i PAL
HDCP
Chris, thanks for the reply. You actually surprised me since it appears from your response that he 2407WFP and the 2407WFP-HC have the same inputs modes. The reason that surprised me was reading the Video Support Modes section of the 2407WFP-HC users manual which says:
Video Supported Modes
-------------------------------
Video display capabilities (DVI playback) 480p/576p/720p/1080p (Supports HDCP)
Video display capabilities (Composite playback) NTSC/PAL
Video display capabilities (S-Video playback) NTSC/PAL
Video display capabilities (Component playback) 480i/480p/576i/576p/720p/
1080i
(emphasis is mine on the 1080i)
Now it wouldn't be the first time a users manual had an incorrect item which is why I asked for conformation. The 2407WFP users manual did not have this section and I also read a 2407WFP-HC review that said they had successfully tested 1080i over component.
So, I was feeling pretty good that it was a capability until I saw your append today. I guess it's better I didn't purchase and then find out.
You probably already have but could you please double-check on 1080i over component for the 2407WFP-HC? It really may be the difference between purchasing and not purchasing the new panel.
Can you clarify something for me? 1600x1200 is listed as a supported resolution in the manuals for both the 2407WFP and 2407WFP-HC. However, it has been reported that on the 2407WFP 1600x1200 only works in Fill mode, in other words not using the native resolution of the panel. Your list of modes shows a change between the 2407WFP A01-03 (on the one hand) and A04 and the 2407WFP-HC (on the other) in that 1080p now works in 1:1 and Aspect as well as Fill.
Is it also the case that 1600x1200 VGA now works in 1:1 mode? I'll buy one if I can figure out how to get a good image from my Dell X300.
phildlight01
4 Posts
624
0
Posted July 3rd, 2007 11:00