UNSOLVED

vtek63

updated

18 years ago

V

vtek63

23 Posts

0

10731

September 13th, 2008 21:00

2408wfp with hdmi set top box problem

I just got a 2408wfp and I am trying to connect a set top box via hdmi to it and the moment I plug it in, the monitor goes directly into power save. When I unplug it from the monitor, it says no cable connected.I tried changing video output settings from the set top box and various power on sequences to no avail. This is an Amino Amninet 130 IPTV set top box from my TV company.

 

The set top box works fine on another TV that I have and I know the hdmi port on the monitor works as I tested it with hdmi out from another computer.

 

Any help would be greatly appreciated!

 

Thanks!

  • mike5065

    97 Posts

    827

    0

    Posted September 14th, 2008 12:00

    queston: do you have another output from the set top box connected, at the same time? I know that my HD cable box prevents 2 connections at the same time, i.e. my 3250HD cable box works fine over HDMI (for video, using DVI-to-HDMI, into the 2408), but will disable the DVI output if I am already using component.

     

    you could try a Factory Reset on the Dell.

  • vtek63

    23 Posts

    827

    0

    Posted September 14th, 2008 14:00

    I don't have any other output connected to the settop box. just HDMI.

     

    Factory reset didn't help.

     

    Thanks

  • mike5065

    97 Posts

    827

    0

    Posted September 14th, 2008 17:00

    some other thoughts. is there some way to confirm the cable box is sending one of these? (i.e. with your TV, before moving over to the 2408)

     

    "Video display capabilities (HDMI playback): 480i/480p/576i/576p/720p/1080i/1080p"

     

    do combinations of power being on / off help? i.e. power off cable box / 2408, then connect, then power on?

    does component from the cable box work?

    does an HDMI-to-DVI adapter or cable work?  i.e. HDMI at cable box, and DVI into dell?

     

     

     

     

     

     

     

     

    Message Edited by mike5065 on 09-14-2008 02:05 PM
  • vtek63

    23 Posts

    827

    0

    Posted September 14th, 2008 20:00

    Thanks for all the replys...

     

    Yes, the input it set to HDMI on the monitor.

     

    Every time i made a change on the settop box, i left it on the TV and made sure it worked before moving the cable to the monitor. The box uses a special adapter for component and I don't have that. I also don't have an HDMI to DVI adapter to try. I want to have it all go over HDMI so I don't have to run a seperate cable for the speakers.

     

    Its weird cause the monitor just immediately goes into power save mode when i plug in the settop box. once disconnected, it says no cable. But a computer with HDMI output into the monitor works perfect.

     

    Thanks

  • Hanspuppa

    799 Posts

    827

    0

    Posted September 14th, 2008 20:00


    @vtek63 wrote:

    I just got a 2408wfp and I am trying to connect a set top box via hdmi to it and the moment I plug it in, the monitor goes directly into power save. When I unplug it from the monitor, it says no cable connected.I tried changing video output settings from the set top box and various power on sequences to no avail. This is an Amino Amninet 130 IPTV set top box from my TV company.

     

    The set top box works fine on another TV that I have and I know the hdmi port on the monitor works as I tested it with hdmi out from another computer.

     

    Any help would be greatly appreciated!

     

    Thanks!


    I don't mean for this question to be misunderstood, but have you set the input on the 2408WFP monitor with the menu button on the front of the 2408WFP to HDMI?

     

  • Wojtek7

    3 Posts

    827

    0

    Posted September 15th, 2008 20:00

    1. Unplug cable box power cable

    2. Unplug monitorpower cable

    3. Unplug hdmi cable from the cable box

    4. Plug back both power cables

    5. Wait for the box to finish doing it's update (Time appears on SA boxes)

    6. Plug back HDMI cable to cable box

    7. Turn on Monitor, wait a few seconds

    8. Turn on cable box

     

    Should work.

     

    Otherwise call the cable company so they 'reformat' the box by sending a special profile

    When that's done, repeat the steps above. 

  • vtek63

    23 Posts

    827

    0

    Posted September 16th, 2008 04:00


    @Wojtek7 wrote:

    1. Unplug cable box power cable

    2. Unplug monitorpower cable

    3. Unplug hdmi cable from the cable box

    4. Plug back both power cables

    5. Wait for the box to finish doing it's update (Time appears on SA boxes)

    6. Plug back HDMI cable to cable box

    7. Turn on Monitor, wait a few seconds

    8. Turn on cable box

     

    Should work.

     

    Otherwise call the cable company so they 'reformat' the box by sending a special profile

    When that's done, repeat the steps above. 


     

    Tried the sequence and didn't work.

     

    On the brighter side however, I was able to borrow a HDMI to DVI cable from a friend and that worked fine (minus the audio)

     

    I wonder why the HDMI port on the monitor doesn't like my settop box....