UNSOLVED

realmild

updated

3 years ago

Closed

R

realmild

6 Posts

0

32595

September 2nd, 2008 09:00

2408WFP, overscan problem

I bought a Dell 2408WFP LCD monitor on 8-15-2008. After connecting the LCD to the computer with a dvi cable and switched it on, I discovered the LCD overscans, that is, the screen image is larger than the desktop area at 1920x1200 resolution. However, if it is set at 1600x1200, it does not overscan. If it is connected with a VGA cable, the problem does not arise. Dell gave me a replacement. But when the replacement arrived, I found that the problem is not resolved. The overscan problem is still there. The LCD is A00 edition whereas the cd is A01 rev. Dell technical support is unable to resolve the problem. Please help me to resolve the overscan problem.

(edited)

  • gpro

    2 Intern

    •

    2024 Posts

    1420

    0

    Posted September 2nd, 2008 09:00

    What graphics driver?
  • realmild

    6 Posts

    1420

    0

    Posted September 2nd, 2008 11:00

    My graphics card is Nvidia Geforce FX5500.

    Driver date:5/16/08

    Driver version:6.14.11.7519

  • realmild

    6 Posts

    1420

    0

    Posted September 2nd, 2008 13:00

    I've unchecked the box 'Treat as HDTV' and tried to create custom resolution.

    The overscanning problem still there.

     

    When I clicked on properties and then setting, there is an option of 1920x1200.

    When this resolution is set, there is overscanning problem.

    Anybody else having such problem?

  • gpro

    2 Intern

    •

    2024 Posts

    1420

    0

    Posted September 2nd, 2008 13:00

    I've read dozens of threads on this issue and I'm still not sure about it.

     

    First thing to try is open the nVidia Control Panel and choose 'Advanced Settings'.

    Then go to Display > Manage Custom Resolutions, uncheck 'Treat as HDTV' and click Apply.

    If that doesn't work I'd try creating a custom resolution using 'CVT reduced blanking'. 

    You might have to then go back to 'Change Resolution' to enable it.

     

    I've also read that 1920x1200 is not supported over DVI on the FX5xxx series cards.

  • TALON1973

    14 Posts

    1420

    0

    Posted September 2nd, 2008 17:00

    hmm very old card .. after doing a quick search ( not easy )  i found one tech spec for 1 version of the 5500...

     

    it said it supported 1920 x 1200 @ 85

     

    the 2408 doesnt do 85 refresh

     

    could be your problem is the card wont do the necessary refresh rate

  • realmild

    6 Posts

    1420

    0

    Posted September 2nd, 2008 21:00

    Yes, it is a very old card, a replacement for a Ati card on a 8300 system.

    The lcd refreshes at 60.Could it be the card is not compatible?

  • gpro

    2 Intern

    •

    2024 Posts

    1420

    0

    Posted September 2nd, 2008 22:00

    The 1920x1200 @85Hz spec would not have been for DVI. 

     

    This article describes how FX5200 cards could not reliably support the pixel clock rate required for high resolutions. My understanding is that it was the case for all 5xxx series cards and at some point nVidia disabled support for 1920x1200 in the driver.

     

    The solution for others with the same problem in this forum has been to replace the card.

  • realmild

    6 Posts

    1420

    0

    Posted September 3rd, 2008 00:00

    Thank you. I will look into your suggestion.

    It is very likely the card could be the cause.

  • realmild

    6 Posts

    1420

    0

    Posted September 13th, 2008 08:00

    The overscan problem for my Dell 2408wfp lcd is resolved. I replaced my Geforce fx5500 with a Powercolor 9600 pro 256mb which supports 1920X1200 resolution.