This has probably been answered, but I didn't find it in a quick search...
I've got a 2407 hooked up by DVI to my Mac, and by Component to my HD cable box. The monitor has no problem remembering it's main input, but whenever I turn on the picture-in-picture it defaults to Composite. Is there any way to get it to default to Component?
I have the same problem on my WFP2407-HC, except that it PIP input defaults to S-Video. PC connected via DVI (Radeon 2600HD), video connected via composite.
I can repeatedly produce the effect with the following procedure
1) Choose DVI as main input
2) Activate PIP (defaults to S-Video)
3) Choose "Menu => PIP-Settings => PIP Source => Composite"
4) Choose "Exit menu"
5) Turn PIP off
6) Change main input to Composite
7) Change main input back to DVI
8) Activate PIP again
==>> Blue PIP window is shown that says "No S-Video Input Signal"
In rare cases and under unknown circumstances the monitor seems to remember the setting even after these eight steps, but then the setting is lost after power down/power up.
Can you please provide me with some advice how to fix this annoying problem? Thanks a lot in advance!
DELL-Chris M
Community Manager
•
56891 Posts
•
232143 Points
124
0
Posted July 14th, 2007 15:00
On my 2407WFP, once I enter the PIP Settings and choose the PIP source, it remembers it.
DELL-Chris M (old account)
#IWork4Dell