UNSOLVED

avm1976

updated

21 years ago

A

avm1976

2 Posts

0

6842

November 9th, 2005 17:00

2405 FPW monitor on 220 Volts?

Is it posible to use a transformer of 220 to 110 Volts with the 2405 monitor
without experiencing any problems ? Is there any tips I should know?
100 W transformer would be enoughfor this monitor?
 
thanks for your time.  
  • agsco

    12 Posts

    213

    0

    Posted November 10th, 2005 11:00

    it should run on any ac voltage between 100-240 vac, but I doubt your 100 watt transformer will be big enough as it can draw up to 2 amps, best just try it , can do any real harm, if you see smoke coming out of either I would switch them off!!
  • avm1976

    2 Posts

    213

    0

    Posted November 10th, 2005 15:00

    Thanks for your reply. What you mean is that this monitor can operate at US and Europe too without

    using a transformer?

    I checked its specs and though im not an expert about this kind of matter

    I noticed that the consumption of the 2405 is 80 W maximum. So I thought that a 100 W would do the job..(?) .

    Of course I dont care about what happens to the transformer but I really care not to burn the monitor ..!

  • agsco

    12 Posts

    213

    0

    Posted November 10th, 2005 18:00

    80w seems a bit low, check the heat coming out of it, it may be 80w min but at 110volts I suspect it would be more like 220watts.