UNSOLVED

offtone

updated

21 years ago

O

offtone

11 Posts

0

2531

September 28th, 2005 18:00

2405: Dead Pixels

Well at first I thought I only had one of them, and since it was very near the top of the screen (and about 20cm from the right) I thought I could live with it. Now after a couple days' use, I've noticed one more and it's pretty much in the center of the screen. It's a bright one while the other one is dark.

What's the deal with these? Is this common on these monitors? I'm pretty obsessive about my displays, but I'd imagine anyone would after having spent this much money. I've got a replacement coming (for a completely different issue, mind you) so maybe I'll get lucky with that one and it'll be flawless. Or is this asking a whole lot?

Just curious how prevalent this issue really is. Am totally new to LCDs and was reluctant to buy one but figured issues like this would be dealt with at this level.
  • 235

    0

    Posted September 28th, 2005 19:00

    It's just a defect of LCD screen technology.  I have one that is stuck on red on my 2405fpw but it's virtually unnoticable unless it's on a red or black background and you know where it is.  I saw it the first day and gently rubbed it and it went away.  The next day I noticed it again but it wouldn't go away.  I've thought about getting a replacement but since I have no other problems with my monitor I think I'll just live with it. 
     
    Try gently massaging the spot with a tissue or dry cloth to see if you can get the pixels to turn on again.  There's also a video you can download which flashes several colors.  Some people have had success with it reviving stuck or dead pixels.
  • Gnord

    1 Message

    235

    0

    Posted September 29th, 2005 16:00

     
    This is the link I recieved from the automated response email.
     
    My problem is that the pixel is almost directly in the center of my screen, and it's always green.
     
    I hope it's possible to make an exception for this one since it's directly in the center of the screen.
  • Mr Tyzik

    15 Posts

    235

    0

    Posted November 3rd, 2006 23:00

    I have had my 2405 since 6/2005. I absolutely love it. I actually only get a slight whine when the thing is off but still plugged in.

    Anyway a dead pixel just showed up on mine. The response to this issue on the board is always "it is a common LCD problem". Now I have a question. Did I get a slightly defective 2405 or do I have a perfect 5 yr old Inspiron 8100. There is not ONE dead pixel on it. Having paid the amount of $ that would get a new laptop these days for this display I would expect no dead pixels for at least 5 years. This had better not continue or it will be my last Dell monitor I will risk big $$$ on.

    Jim
    Denver, CO
  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    235

    0

    Posted November 4th, 2006 23:00

    All,

    Pixel defects in monitor/LCD TVs are described as -
    Stuck on: Pixel is emitting light at all times, independent of the video signal
    Stuck off: Pixel will not emit any light regardless of the video input signal
    Partial: Part of the pixel is stuck on or off, but the remaining area of the pixel behaves normally. This will result in incorrect luminance levels from the pixel
    Dim: Pixel is stuck in an intermediate state of brightness, neither completely on or off, independent of the video input signal
    Adjacent Pixels: Consists of two defective pixels side by side

    General guidelines -
    One to five stuck pixels anywhere on the screen is not terms for replacement. This is within normal operation of the panel specification. Replacement of the monitor/LCD TV is authorized with 6 or more defective pixels
    Exception -
    Two adjacent stuck Pixels anywhere on the panel is considered a failure and replacement of the monitor/LCD TV is authorized
    =====

    Sometimes 3rd party software can "unstick" a pixel. Go here to get Dead Pixel Buddy 1.1.
    * Click External Mirror 1
    * Click Save- Desktop- Save
    * Click Start- My Computer- C:
    * Click File- New- Folder
    * Name it Dead Pixel Buddy [press the ENTER key]
    * Move the DPB.zip file into this newly created folder
    * Open the Dead Pixel Buddy folder
    * Right click DPB.zip
    * Click Extract Here
    * Double-click DPB.exe
    * Click Time Cycle and let it run. Every 10 seconds it will change the color. The longer you let it cycle through the colors, the more chance it will have to unstick the pixel


    DELL-Chris M (old account)

    #IWork4Dell