I have a light coloured circle in the top left hand section of the screen on starting up or shutting down. It only occurs on this screen. I have run a lot of monitor tests for backlighting, banding etc and this problem only shows up as I said on the shutting down or starting up screen.
* Can someone please tell me if this is normal.
* Also can anyone tell me if there are any 20" Wide Screens that do not have banding, or is it just that other monitors do not have a game or multimedia setting.
Here is a shot of what I am talking about.
http://www.pbase.com/reelate2/image/63418196/large
had me checking my other machines' shutdown screens :smileyvery-happy:
cool site puzl
relate2,
The banding is caused by the Faroudja Adaptive Color and Contrast (ACC) and Active Color Management (ACM) technologies incorporated into the panel controller. These tools enable color and contrast level presets in combination with the various theme modes.
Whenever the colors or contrast of an image is enhanced there are certain factors to consider:
Contrast Enhancement versus Color Resolution The color resolution is the number of different intensities that the display is able to reproduce. When the contrast is increased the color resolution is decreased proportionally.
Color Enhancement versus Linearity The linearity is the smoothness of visible color variation as a function of the intended color variation. When the color hue or saturation is enhanced the linearity will be adversely affected.
Reduction in color resolution or linearity may result in ‘banding’ or ‘contouring’ with images that contain smooth color gradients
ACC/ACM is used in panel controllers manufactured by Genesis Microchip Inc. Other manufacturers use different panel controllers.
Thanks for that, it had me worried for a while. :-)
Any answers to my second question about other LCD's and banding?
Also here is my mini review after having my monitor for a couple of hours.
* Easier to set up than my BenQ 20" wide screen I sent back because of bad pixels. The BenQ's image quality was about the same but in default mode straight out of the box it was terrible. The Dell plays my DVD's better.
* I have one stuck pixel on the right hand edge of the screen. I must say though the BenQ did not develop the group of bad pixels until day 5 of my ownership. So I will wait and see regarding the Dell.
* I did not test the BenQ for banding so I can't comment how it compares. Although the Dell certainly has pronounced banding when not in Desktop mode.
* My screen is A02 and made in China. It also apparently has the older screen upgraded to the 2007WFP standard. (This is a bit of a bummer but not much I can do about it unless Dell releases a 2008WFP in the next 14 days.)
* I like the USB port on the side of the screen, very nice.
* I like the up and down range and the 90 degree ability of the screen. Is this worth the $200 more than I paid for the BenQ I will let you know after 15 days.
Yes it is that screen. Without the BenQ side by side I will take your word for it, I was just going from memory from last week. I will say again though it took me quite some time to adjust the BenQ to get a decent image out of. I have had some experience with graphics and I would say that the average user would find the BenQ very unsatisfactory.
Thanks gpro, I guess until the next round of technology comes around it is all a balancing act.
I will say though playing games in a wide screen format rocks. It certainly enhances the feel of the game. I am playing Oblivion and Half life 2 Lost coast and Episode 1 and it is a quantum leap up from my old 17" CRT. :-)
puzl
4 Posts
218
0
Posted July 13th, 2006 09:00