I have a 1905FP and it worked fine, then went blank. I believe it is in power save mode and I don't know how to fix it. It has a green light but the screen is completely black. I have a Dell Dimension 8300 PC, operating on Windows XP and I am using an analog connection. Can anyone help?
Since you have a solid green light I would assume it is NOT in powersave/suspend mode. Normally if in this state the light would be yellow.
I would check your video connectorions. If you still have no video I would try another monitor. If the other monitor doesn't work then I would say your video card is the issue.
Make sure you've already reboot the PC. The PC could be froze in a suspend state, etc.
I reported the same problem day before yesterday and haven't heard a response yet. I have also tried another monitor which works fine and tries the possibly faulty monitor on another system where is exhibited the same problem. If I power cycle the monitor, the image will stay up for about 4 seconds and then the screen goes blank again. Perhaps this series of monitors had a faulty design or a particular shipment went out with some faulty parts. The power light stays green, so it's not in power save mode and it has nothing to do with a particular OS.
Same problem here. While on the computer for over an hour the monitor suddenly went black. Took apart all the connections and even removed and reinstalled the video card. Nothing. Switched with another monitor and the second monitor worked fine, thus eliminating the computer or software. Took the bad monitor to another computer and still black screen. Green light is on.
Does this happen with both cables? Can you get a constant image if you swap your cable from dvi to d-sub, or vice versa? Also, have you loaded Dells drivers from their CD?
Count me in ! Same problem. I downloaded new driver for monitor on Dell's web site and nothing changed. I believe I'll have to return my brand new monitor and have a new one back.
Here is my post in video section :
Hello,
I just bough Dell Dimension 5150 with radeon x600 Hyper memory 256MB and a Dell 1905FP monitor. I think everything is set up correctly and I already updated some drivers but I still have a little problem : after a non-definite periode of time (from 1 second to 1 hour+) my screen goes black like if it have been closed but the power is still on !?! To solve the problem I must turn off the monitor, wait few seconds and turn it on again. At the beginning of a session, it happen very often then it happen less often with time.
Does somebody have an idea to help me solve that problem please ?
I have the same problem with a VIewsonic monitor. I sent it back and I still have the same problem.It is a Dell problem on the laptop. ANyone find an answer?
gtthndr
7 Posts
1158
0
Posted January 11th, 2006 14:00
Since you have a solid green light I would assume it is NOT in powersave/suspend mode. Normally if in this state the light would be yellow.
I would check your video connectorions. If you still have no video I would try another monitor. If the other monitor doesn't work then I would say your video card is the issue.
Make sure you've already reboot the PC. The PC could be froze in a suspend state, etc.