
UNSOLVED
Closed
Problem installing GeForce4 on Inspiron 8100
Previously I posted a message (see post 07/02/2002) regarding problems installing GeForce4 Go 440 drivers. DELL had decided to upgrade me from the ATI Radeon 7500 to the GeForce4 Go 440 card due to ongoing problems.
Since my last post DELL have made 3 more attempts to have the 2835 DELL drivers work with the new card. I know many of you responded to my post in an attempt to get me in the right direction. I did as instructed, including the instruction that appears below from DELL support. Even the engineer himself was baffled as to why the drivers could not be forced to recognise the new card. All previous ATI drivers and references to the ATI card were completely removed from the system, with the system shut down the ATI card removed and replaced with the GeForce 4 Go card. The system re-booted and BIOS recognised the GeForce4 card. Current BIOS is A11. Attempts were also made installing another hard drive(new) and the same problems recurred.
Has anyone with an Inspiron 8100 experienced a similar problem, or can anyone advise as to what the problem might be. Any help would be appreciated.
The message below is the recent response received from DELL.
01. After installing the video card in, make sure bios version is updated to latest A11 bios.
02. Windows XP will detect it as Standard VGA adapter, ignore this and delete the entry in device manager.
03. Proceed to extract the Geforce4 drivers to a new directory called [geforce4], then let the installation drivers go through.
04. Cancel and ignore any detect new hardware prompts (magnifying glass icon).
05. Go to ADD HARDWARE wizard, and manually force install a display adapter in.
06. Choose the HAVE DISK option and point it to your [geforce4] directory.
07. Choose "nVidia Geforce4 440 Go (Dell Mobile)" and let setup continue.
08. Ignore any prompts for hardware detection.
09. Shutdown the system and restart.
10. Geforce4 should be working now.
Since my last post DELL have made 3 more attempts to have the 2835 DELL drivers work with the new card. I know many of you responded to my post in an attempt to get me in the right direction. I did as instructed, including the instruction that appears below from DELL support. Even the engineer himself was baffled as to why the drivers could not be forced to recognise the new card. All previous ATI drivers and references to the ATI card were completely removed from the system, with the system shut down the ATI card removed and replaced with the GeForce 4 Go card. The system re-booted and BIOS recognised the GeForce4 card. Current BIOS is A11. Attempts were also made installing another hard drive(new) and the same problems recurred.
Has anyone with an Inspiron 8100 experienced a similar problem, or can anyone advise as to what the problem might be. Any help would be appreciated.
The message below is the recent response received from DELL.
01. After installing the video card in, make sure bios version is updated to latest A11 bios.
02. Windows XP will detect it as Standard VGA adapter, ignore this and delete the entry in device manager.
03. Proceed to extract the Geforce4 drivers to a new directory called [geforce4], then let the installation drivers go through.
04. Cancel and ignore any detect new hardware prompts (magnifying glass icon).
05. Go to ADD HARDWARE wizard, and manually force install a display adapter in.
06. Choose the HAVE DISK option and point it to your [geforce4] directory.
07. Choose "nVidia Geforce4 440 Go (Dell Mobile)" and let setup continue.
08. Ignore any prompts for hardware detection.
09. Shutdown the system and restart.
10. Geforce4 should be working now.
Responses (9)
Solutions (0)
- 1. Download the Dell drivers.
2. Then open the file you downloaded with WinZip (do not execute it!). Extract all files into a directory.
3. Now you don't have to uninstall the Standard VGA Adapter.
You go into Start/Control Panel/System/Hardware/Device Manager/Display Adapters
4. Right click on Standard VGA Adapter and choose update driver.
5. Choose "Install from a list or specific location"
6. Click next.
7. Choose "Don't search. I will choose the driver to install."
8. Click next.
9. Click on "Have Disk".
10. Click on "Browse" and choose the directory you extracted the drivers to.
11. Choose the file called NVDM.INF .
12. Click on "Open".
13. Click on "OK".
14. A list of drivers will now be displayed. Choose the first one in the list ("NVIDIA GeForce 4 440 Go (Dell Mobile)").
15. Click next.
16. A warning might appear that the driver is not WHQL certified or not suitable for your Hardware. Ignore this and install the drivers anyway.
17. Let the installation procedure commence.
18. Click Finish.
19. A dialog will appear to reboot your Computer. Click Yes to reboot your Laptop.
20. Your GeForce 4 440 Go should be working properly after restart, you might have to choose the right resolution and color depth in the Display Properties.
Glzmo
-----------------------------------------------------
Dell Inspiron 8100
BIOS Rev. A11
PIII-M 1GHz
512MB RAM (256MB Dell + 256MB Crucial)
NVidia GeForce 4 440 Go 64MB DDR
15" Samsung SXGA+ LCD
40GB Hard Disk Drive
20GB Hard Disk Drive in Media Bay
8x LG-DVD ROM DRN8080B fixed optical drive
Actiontec MiniPCI LAN/Modem combo
ESS Maestro PCI Audio
OS: Windows XP Professional oskarbosch
1 Message
516
0
Posted July 6th, 2002 15:00
I noticed a similar problem with a collegue (upgrading to GF4). The main thing different that we did was to first run the setup.exe that came with the Geforce 4 driver (we used the detonator, version 29.60).
After having run this setup, rebooted, and than the card would be recognized, and we could install the drivers as described in your message.
Hope this helps....
- I said this before but the post didnt go through, go to tools folder options, in windows explorer, then, view tab. after that select show hidden files and folders, uncheck hide extensions of known file types and uncheck hide protected operating sytem files. then you should be able to see the inf files, hopefully, i hope this helps you.
-----------------------------------------------------------------------
Dell Inspiron 8100--
Intel Pentium III-M 1 GHz
15" UXGA TFT Screen (1600x1200)
30GB ATA 100 Toshiba HD
64MB DDR ATI Radeon Mobility 7500
8x/4x/24x CD-RW Drive
512MB PC-133 2 SODIMM's
2 batteries and Modular floppy drive
Running Windows XP Professional
All for about $1523, not counting winxp pro upgrade. - Thanks for your reply. I already have the "hidden files and hide protected OS files" unchecked. I have always done this by default. The respective .INF file is visible when the DELL driver update is unizipped into its own folder (geforce4). However something is not right if a DELL engineer can't figure out the problem.
Xevious wrote:
- I said this before but the post didnt go through, go
- to tools folder options, in windows explorer, then,
- view tab. after that select show hidden files and
- folders, uncheck hide extensions of known file types
- and uncheck hide protected operating sytem files.
- then you should be able to see the inf files,
- hopefully, i hope this helps you.
-
------------------------------------------------------------------------
- Dell Inspiron 8100--
- Intel Pentium III-M 1 GHz
- 15" UXGA TFT Screen (1600x1200)
- 30GB ATA 100 Toshiba HD
- 64MB DDR ATI Radeon Mobility 7500
- 8x/4x/24x CD-RW Drive
- 512MB PC-133 2 SODIMM's
- 2 batteries and Modular floppy drive
- Running Windows XP Professional
- All for about $1523, not counting winxp pro upgrade.
- One more suggestion, try booting up into safe mode by pressing f8 right when XP boots, then select safe mode. try changing the driver in safe mode, ive had issues when i could change the driver before, but it worked in safe mode. just another suggestion, i hope this helps, and 2 bad if a dell engineer cant figure it out, if you can get it working, who cares. yes dell techs are pretty stupid.
-----------------------------------------------------------------------
Dell Inspiron 8100--
Intel Pentium III-M 1 GHz
15" UXGA TFT Screen (1600x1200)
30GB ATA 100 Toshiba HD
64MB DDR ATI Radeon Mobility 7500
8x/4x/24x CD-RW Drive
512MB PC-133 2 SODIMM's
2 batteries and Modular floppy drive
Running Windows XP Professional
All for about $1523, not counting winxp pro upgrade. - I will try what you suggested and see how it goes. Some how I don't think it will work...
Inspiron I8100
PIII 1.0GHZ
384MB PC-133 SDRAM
15" UXGA SHARP LCD
ATI Radeon 7500 64MB DDR
IBM Travelstar 30.0GB HDD
Teac 16x8x24 CD-RW (Fixed)
Teac DVD (Modular)
Teac 1.44MB FDD (Modular)
3Com 56K, 10/100 LAN mini PCI
Single Battery
Windows XP Professional - Wow.. I am in a very similar situation.. I had a gfg2 card,, I upgraded to the gfg4 and the bios sees it, (a11) but win 2k will not detect it as anything other than a standard vga card.. I keep pointing it to the INF file, and it never gives me a list of any other cards to choose...
I am running MOBO A00 and I am wondering if the people who have had success are running a different revision?
So far no answers..
Hope this helps?
John

liban1955
5 Posts
516
0
Posted July 6th, 2002 11:00
When I perform the option all the way through to "11" the NVDM.INF file does not appear in the window. The drivers used were the latest DELL 2835 drivers. This was tried several times and without success. The weird is 3 brand new cards have been used and 3 different copies of drivers also used without success.
glzmo wrote:
- 1. Download the Dell drivers.
- 2. Then open the file you downloaded with WinZip
- (do not execute it!). Extract all files into a
- directory.
- 3. Now you don't have to uninstall the Standard VGA
- Adapter.
- You go into Start/Control
- Panel/System/Hardware/Device Manager/Display
- Adapters
- 4. Right click on Standard VGA Adapter and choose
- update driver.
- 5. Choose "Install from a list or specific
- location"
- 6. Click next.
- 7. Choose "Don't search. I will choose the driver
- to install."
- 8. Click next.
- 9. Click on "Have Disk".
- 10. Click on "Browse" and choose the directory you
- extracted the drivers to.
- 11. Choose the file called NVDM.INF .
- 12. Click on "Open".
- 13. Click on "OK".
- 14. A list of drivers will now be displayed. Choose
- the first one in the list ("NVIDIA GeForce 4 440 Go
- (Dell Mobile)").
- 15. Click next.
- 16. A warning might appear that the driver is not
- WHQL certified or not suitable for your Hardware.
- Ignore this and install the drivers anyway.
- 17. Let the installation procedure commence.
- 18. Click Finish.
- 19. A dialog will appear to reboot your Computer.
- Click Yes to reboot your Laptop.
- 20. Your GeForce 4 440 Go should be working properly
- after restart, you might have to choose the right
- resolution and color depth in the Display
- Properties.
-
- Glzmo
-
------------------------------------------------------
- Dell Inspiron 8100
- BIOS Rev. A11
- PIII-M 1GHz
- 512MB RAM (256MB Dell + 256MB Crucial)
- NVidia GeForce 4 440 Go 64MB DDR
- 15" Samsung SXGA+ LCD
- 40GB Hard Disk Drive
- 20GB Hard Disk Drive in Media Bay
- 8x LG-DVD ROM DRN8080B fixed optical drive
- Actiontec MiniPCI LAN/Modem combo
- ESS Maestro PCI Audio
- OS: Windows XP Professional