
UNSOLVED
Closed
New Inspiron 5150 3.2GHz HyperThread - locked at 3.2Ghz after XP re-install
Hello All,
I've just taken delivery of a new Inspiron 5150 3.2GHz P4 with HyperThreading - and out of the box the Speedstep functions worked fine, with the CPU speed dropping to 1.59GHz when running in any of the various battery save modes.
My mistake? Re-installing Windows XP to get rid of all the AOL/Tiscali/Trial Software junk that every manufacturer seems to include in their factory builds...
After re-installing XP and all of the required Drivers from the Dell Resource CD, I found that the CPU was always running at 3.2Ghz regardless of the power save mode. I have also downloaded the latest P4 and Intel Chipset Drivers, plus the latest NSS tools from the Dell Website --- no luck here. I use the WinXP system info plus Intel Clock Speed Check utility to check CPU speed, but I can also tell from the extra heat that is generated by the fan when it is running at 3.2Ghz!
It is possible to disable SpeedStep in the BIOS (I have latest version A29, as shipped) and the CPU drops to (and stays at) 1.59GHz as expected - at least this means that I can manually run in low speed to conserve battery! Note: SpeedSwitchXP does *not* work on this machine.
Dell Support have been *utterly* useless - the best they can suggest is that I re-install the system with the latest drivers (and it's not like I haven't done this twice already). They even sent me a document which explains how to configure SpeedStep in Windows 2000... even though I took great pains to explain I'm running XP!
I suspect that there may be some drivers available in the factory build that are not yet in the public domain - but trying to find this out from Dell is like getting blood from a stone. Any thoughts at this stage from anyone who has experienced anything similar would be helpful...
Many thanks,
Antony
Inspiron 5150
3.2GHz P4 HyperThreading
512MB RAM
40GB HD
SXGA
TrueMobile 1300 MiniPCI
WindowsXP Home
Responses (11)
Solutions (0)
Thanks a lot! Would you believe that this documentation is not available on the European Support Website (I'm UK based)????
The crucial difference here seems to be the *order* in which you install the drivers... Chipset first and other devices afterwards.
I will try this out and post to the forum with the results... I'm sure other European users would miss this documentation too.
Thanks,
Antony
Well - I tried the suggested solution at the weekend, and it made no difference at all.... I guess I'll just keep my eyes on the downloads section and wait for the next batch of updated drivers :-(
It's such a shame - when I disable speed step and run at 1.6GHz I get 4 or 5 hours battery time - even with radio enabled. When I switch speedstep on in the bios it runs flat out at 3.2Ghz and i only get a couple of hours use.... it's all very disappointing, because other than that this seems to be a very good machine!
Antony
I finally fixed the problem - the CPU now switches correctly between 1.59GHz and 3.2GHz depending on load... here's how I got to the solution :-)
One of the threads in this forum referenced the following Microsoft Article for Mobile Pentium 4 Hyperthread Drivers:
http://support.microsoft.com/default.aspx?scid=kb;en-us;823583This article explains that you need the following driver:
Date Time Version Size File name
-------------------------------------------------------
20-Aug-2003 13:57 5.1.2600.1264 31,744 Intelppm.sys
22-Aug-2003 11:55 1,584 Ippmqfe.infI did a quick search for this file on my system - and found the correct version in the following directory:
C:\Program Files\Dell Computer Corporation\Mobile Pentium 4 Hyperthreading Driver\ENUThis file had obvisouly been extracted by the Dell Mobile Pentium Driver Utility - so I thought I'd double check the Processor Driver in Device Manager ----> it was *not* the same version. I did a manual update of the Processor Driver and rebooted, but there was no change.
So I went back to Device Manager and found that while the first Processor instance now had the correct file version, the second instance did not. After manually updating the second Processor instance and rebooting ---- SpeedStep WORKS!!!!
I have since been back and re-read all of the relevant Dell instructions for updating these drivers, and they say nothing more than extract and run the utility. So either I have been dumb and missed some obvious instructions somewhere - or the Dell utility does not work.
Either way - I hope this helps anyone who has the same issue... thanks to all forum members whose articles I have read in the pursuit of solving my problem!
cheerio,
Antony
- the link for mobile pentium 4 chipset:
http://support.dell.com/filelib/Devices.aspx?Category=27&OS=WW1++&OSL=EN&SvcTag=&SysID=INS_PNT_P4_5150
hope it works for you.
quick follow up to original message. i tried installing the intel moble chipset but it never would install properly on my compter.
only the microsoft moblile pentium 4 chipset would install properly.
but speedstep still working fine.

ksiow02
158 Posts
251
0
Posted January 30th, 2004 03:00
http://support.dell.com/us/en/kb/document.asp?DN=1084247
Look at the above documentation. Need minor update though... You just need to install support chipset driver: Intel and Microsoft Chipset Support Drivers. You can download them in the download area...