UNSOLVED

ldivinag

updated

20 years ago

Closed

L

ldivinag

7 Posts

0

16363

June 5th, 2006 20:00

lat D610, DOS GHOST and USB 2.0 problems...

anyone else ghosting these machines?

my combo:

lat 610
ghost 2003 (using a dos boot disk and dos CONFIG.SYS drivers for USB2.0)
external seagate 2.0 HD


before this year, i had ZERO problems booting from dos and runnhing ghost.

now, these generations of D610 refuses to see the drive. i can plug these drives via windows afterwards and no issues.

i'm running into the same problems with a new crop of OPTIPLEXs too.

i just spent over 30 mins with dells support person and still no issues.

i'm resorting to burning the ghost image to a DVD which takes 2-3x longer.

i'm making sure the BIOS has USB legacy support.

help...........
  • Jeff

    16 Posts

    737

    0

    Posted June 7th, 2006 02:00

    One question, have you noticed that the new machines are coming with SATA drives installed..  I am willing to bet that your current version of Ghost will not properly identify the drives when attempting to image to them... Check Symantec's site for an answer... When I had a similar problem years ago, Symantec released a patch to registered owners of their product, but you had to request it....
     
    debonairone
  • Jeff

    16 Posts

    736

    0

    Posted June 8th, 2006 17:00

    That is true; however, I am actually referring to your version of Ghost...  It seems, unless I am being completely airheaded these days, that Ghost is not seeing the drive when used with a D610...  Is that correct?  If that is the case, then I would check on Symantec's website for a patch to ghost.exe (or rather a newer release to recognize the drive...  Years ago, ghost had to release a patch when machines began being shipped with the next generation hard drives.. This may be a similar issue..  I am ghosting D620's without incident and am regularly using drives connected via USB both in Windows and while imaging...  What are the specs on the external drive... ?

     

     

  • ldivinag

    7 Posts

    736

    0

    Posted June 8th, 2006 17:00

    thanks for the reply...

    but the internal SATA drives would not OR SHOULD NOT make a difference to the EXTERNAL drive being seen or not.
  • ldivinag

    7 Posts

    736

    0

    Posted June 8th, 2006 18:00

    no, i believe the problem is the current implementation of USB or even the current crop of BIOS'es.

    on the optiplex gx620 (new desktop, although the guts are so close to being a laptop), i tried a firewire PCI card that the dos based firewire drivers didnt see the external seagate drive that i have been using for about 6-8 months now.

    all my ghosting is done in dos, with a ghost made boot disk.

    i'd be interested in your D620 (a widescreen, right?) if you can try an experiment for me. boot with a ghost 2003 cd (my ghost 9.0 came with a separate ghost 2003 cd) and try to just see if the dos based config.sys drivers can see you external drive.

    you dont even have to run ghost. just boot with it and then select which USB driver you use (i assume USB 2.0). it will list a device that is connected to your USB port...

    thanks...

    Message Edited by ldivinag on 06-08-200602:10 PM

  • Jeff

    16 Posts

    736

    0

    Posted June 8th, 2006 19:00

    However I can help... Just one more question, when you created the boot disk using the Ghost Boot Wizard, did you enable the firewire support by allowing ghost to take over, or did you just use your own dos drivers... ?  I use a Corporate Version of Ghost and that is available as an option for me...

    debonairone@gmail.com

  • ldivinag

    7 Posts

    736

    0

    Posted June 8th, 2006 20:00

    no. i use the retail version. our computer labs do use the corporate version.

    when you make the boot disk, it does give you the option to include both usb 1 and 2 and firewire.

    and then, it formats the floppy and writes all the needed device drivers (funny, they use iomega drivers, IIRC)...

    oh well, like i said, this method has worked for me for 3-4 years.
  • ldivinag

    7 Posts

    736

    0

    Posted June 8th, 2006 21:00

    c**p!!!!!!!!!!!!

    guess what. i did the live update of ghost 2003.

    i have 2 copies. one on my personal machine. and another retail version that i use for ghosting all other machines.

    anyways, the live update did some updates and sure enough, one of the updates is the IOMEGA dos driver for the USB 2!!!!!!!

    one i had before was dated aug 2002. this new one is may 2003.

    arrrrggggggggggg......

    now it works on an optiplex that wouldnt run before so i can assume (crossing fingers) that the lat D610 SHOULD work also...

    thanks for the upgrade tip...

    sigh....

    btw, this site doesnt like the word, "C R * P" lol....
  • Jeff

    16 Posts

    736

    0

    Posted June 8th, 2006 23:00

    hahah...  well, as long as you got it working...  glad to have been of service..  if someone had given me the answer years ago, it would have saved me almost 6 weeks of head banging...  Ah well..  we live and learn...  or is it we learn to live... 

    take care...

    debonairone