UNSOLVED

phillwooller

updated

21 years ago

Closed

0

4166

September 30th, 2005 07:00

inspiron 8200 screen

I've just replaced the video card and then the system board in my 8200, the video card was causing corrupt graphics and the system board would only flash it's led at me. I've now got a problem that booting up from cold won't display anything. I haven't worked out whether it's just the backlight or the whole lcd. After a couple of goes it comes on.
 
Is it possible it's the screen inverter? Or is it going to be the lcd/backlight?
 
Phill
 
  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    202

    0

    Posted September 30th, 2005 10:00

    First thing to do is isolate the problem - try an external monitor. If that works, the backlight or inverter could be bad. If it doesn't, the video card or mainboard is faulty.
  • 202

    0

    Posted September 30th, 2005 13:00

    Ok, I will give it a go. Unfortunately it's intermitent and I don't usually have a monitor laying around. I've flashed the video bios up to the latest in case it makes a difference.

    If it's the inverter or backlight is there any easy way to tell which needs replacing? I guess the inverter is the first thing to try as it's user replacable.

    Phill

     

  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    202

    0

    Posted September 30th, 2005 14:00

    The backlight is more likely to have failed than the inverter - and while the inverter is easier to replace, it's harder to find. The inverter must match the existing one exactly, and most manufacturers do not sell the part separately from the display panel.
  • 202

    0

    Posted September 30th, 2005 18:00

    I had a similar problem. I took it to a local computer shop which charged me $300 to fix it. The guy there never really told me what he did to fix it.
  • 202

    0

    Posted October 1st, 2005 06:00

    Very helpful, I'm not sure it's worth that much to fix it. The screen & backlight work fine after a minute or so booting up. It could be a bad connection on the cable too, with all the problems I've had recently I've stripped everything down quite a few times.

    Phill