UNSOLVED

Noah Vaile

updated

18 years ago

Closed

NV

Noah Vaile

10 Posts

0

35881

January 27th, 2009 04:00

Inspiron-8000: The image looks normal but does not fill the screen. There is a black border around the edges. 15.4" screen.

I have an older Inspiron-8000, O/S Me, purchased in 2001. I use it as a PC game machine and have not used it to go on the internet since a complete wipe & reload in 2006. It ran fine for over a year, then in 2007 I had a power outage, my battery died and when I restarted the screen was simply miniaturized and essentially unusable. After several DELL chats and a complete diagnostics was run it was determined that the outagfe had damaged my hard-drive and so I got a new one.  This worked just fine (although with the new hard-drive my BIOS was un-responsive. All I could do was set date and time, neither move about that opening first page anymore than that nor get to any of the other pages nor even use 'ESC'. I had to manually shut down to get out.) for the next six months, starting up, shutting down and using the I-8000 without incident (apart from the bad BIOS). I subsequently shut the computer down for 12+ months in October 2007. 

When I started the computer back up in mid-November 2008 the battery was nearly drained and that "small screen" problem is back. I am reluctant to get another hard drive or do anything else until I have a good diagnosis. I have gone through the DELL tech-support laptop display steps for this problem and come up with zilch.The final suggestion was to install a 2002 update to my nVidia GeForce2 which DELL says is "optional". The other possibility is the A23 BIOS download from 2004 but I think I read somewhere that there is an incompatibility withn the A23 version and my system.

One techie friend thinks that this may be a dead BIOS/CMOS battery and has suggested replacing it. This seems like quite a chore (and a reasonable suggestion) and am wondering if that is a good diagnosis. 

Another friend thinks the screen is about to die because he thought he saw a pink tinge to it (I don't) and wonders if my motherboard isn't the problem. He suggested "reflashing" the BIOS which he said might (with little confidence) fix the problem, or at least as likely destroy the board.

Since this computer is totally unprepared to go on the internet anything that I need to download to it first has to be downloaded to a Mac, then copied to CD and then downloaded to the 8000.

Any7 help would be greatly appreciated, thank you.

  • bv200

    6 Posts

    1199

    0

    Posted August 25th, 2009 15:00

    I recently ecountered something similar with my Dell Inspiron 8000,

    on boot up pressing F2 does not bring up the bios menu, I don't even get the dell logo, but after 40 sec  it will bring up windows xp login window with only the center of the screen visible (about 5 inch wide), 3 inched from both left and right of the screen (vertically ) is black). I can move the mouse within that window but since the user names are covered but the black parts, I have to tab and guess which user I am login in under. the weired thing is that sometime the Laptop boots normal and I get the dell logo as well as the windows xp logo and the sreen displays in full with clarity, if I hibernate the session, it will work every time. but if I shut down the black screen issue starts again.

    this happened when the power cord broke due to too much movement (There was no short in the cord) and when the batteries ran dry the unit shut itself down abruptly.

    I tried connecting to external monitor but the FN + F8 does not do any thing, in fact non of the FN keys seems to be working, So I am not getting anything on the external monitor.

    Did you solve you problem?

    any ideas you have that I can try will be appreciated. thx!

  • Noah Vaile

    10 Posts

    1199

    0

    Posted August 26th, 2009 10:00

    Yes. My problem has been solved. Turned out that there was a software solution. This worked for me:

    1) on Windows screen go to properties

    2) Click settings (1600 x 1200)

    3) Advanced

    4) Twin View

    5) Device Settings

    6) Screen Adjustment

    7) Flat panel Display>  "Use Display Adapter Scaling"

     

    But I live in constant fear of:

    (A) Screen Failure

    (B) A return to the micro-window.

     

    Good Luck- NV

  • ward733

    246 Posts

    1199

    0

    Posted August 26th, 2009 15:00

    On the I8000 the small screen is sumwhat normal at startup but should correct itself out once windows boots. It does sound as though your Bios is not fuctioning correctly. The memory that the information is contained in can become corrupted by viral or militious activity. The reinstallation of the bios might correct the issue or make your system a brick. The discission is yours to try to rewrite the bios. I have had 50/50 luck in that department. If the drive is larger than what was approved may cause issues due to incompatability. Good Luck..

  • Noah Vaile

    10 Posts

    1199

    0

    Posted August 26th, 2009 16:00

    I gotta tell ya... I got zero, nada, no help online from DELL support. That first.Their suggestions would have cost me plenty and probably refurbished the computer but at what a cost!! As noted I only use it to play a couple of games.

    I then went to several local computer "experts" given that it is way out of guarantee.

    I was told by one that he had no idea. Another said I was on  the verge of screen failure. BUT He could "flash" my bios (whatever the heck that is) which might fix it. But might destroy it. So clearly, he didn't know either.

    A third guy was going to replace the screen after he took it apart as he thought it was some secondary battery (the one that controls date, etc) he could replace which was the closest hardware diagnosis that made sense at the time. But he was too busy with real money making jobs and referred me to this small company just North of Hickory, NC.

     

    THEY fixed it! I have no idea why it screwed up nor did anyone other than these guys but it IS FIXED. I would check out all the preference/properties/software options befiore I went ahead and spent a small fortune on any hardware or other major fix.

    Good Luck.

    NV

  • bv200

    6 Posts

    1199

    0

    Posted August 27th, 2009 10:00

    I am not even seeing the Dell logo when I boot up, I am wondering, it's either a bad video inverter or the video card is zapped.

    Does anyone know what the symptoms of a bad video inverter would be?

    again, I do get a windows login screen but it is partially visible, only the 1/3 of the windows screen is displayed right in the center and the mouse pointer does not go below the 1/2 of the screen.

    I will try to attach an external monitor, that my give me more clues, maybe, maybe not.

    thanks again for your suggestions...

  • ward733

    246 Posts

    1199

    0

    Posted August 27th, 2009 22:00

    The video inverter when it malfunctions would give video distortion. The bios is supposed to retain adjustments and settings that occure undernieth windows. I think it is FN 5  or FN and the monitor logo it shound revert your screen back to normal. I wish I had my 8200 so I could tell you spacifically. Have you recently upgraded you display or is it original? I know you had stated that your FN commands do not work and they are bios level functions and not in the OS. I wish I could help you more.. 

  • bv200

    6 Posts

    1199

    0

    Posted August 28th, 2009 10:00

    the display is original. Thanks for the information on the inverter behavior. I connected an external monitor and It works beautifully, so I went into bios and changed the time and saved it to force it to rewrite the bios in case the driver information in memory had been corrupted. Then I powered down and disconnected the external monitor and the screen remains blank which indicted that the unit is still in the external monitor mode, so I connected the ext monitor while the machine was on and again I could see everything clearly on the ext monitor. I attempted to press the FN f8 (CRT/LCD) and nothing happens the same thing for FN f4 (switch display option), I tried the FN f10 (eject cd) that works fine, so I am thinking that the FN keys that relate to the LCD are the only ones not working.

    My conclusions at this point is:

    1) If the External monitor works the the i8000 video driver is working.

    2) from your description of the behavior of the invertor, that does not seem to be the issue.

    So my next step is to try to go into windows in safe mode and unistall the video driver, reboot and then attempt to reinstall the video driver.

     

     

     

  • bv200

    6 Posts

    1199

    0

    Posted October 6th, 2009 12:00

    OK, the problem was solved when I replaced the ribbon cable that goes from the display to the motherboard. I guess the excessive opening and closing of the laptop wears on the wires. Thanks for all your replies. (I got the ribbon on ebay for $6, although the part was cheap the many hours it took to solve the problem was not. yet in the end it's all worth it)

  • Toffee306

    1 Message

    1199

    0

    Posted June 13th, 2010 09:00

    I'm not adding anything thing on, but would you please make the instructions clearer, thanks

  • bv200

    6 Posts

    243

    0

    Posted June 14th, 2010 09:00

    ref. to http://support.dell.com/support/edocs/SYSTEMS/plav/sm/remove.htm and go to the section for Display and Bezel Assembly

    http://support.dell.com/support/edocs/SYSTEMS/plav/sm/remove.htm#1050927

    replace the flex cable.