UNSOLVED

Soljarag84

updated

20 years ago

Closed

0

2919

September 19th, 2006 02:00

If you have a Geforce 7900 ... Please help me out!

Ever since i got my Dell Inspiron 9400 with the geforce 7900 GS video card, the OpenGL CAD program Rhino3D gives me an error with the nvoglnt.dll file error (thats nvidia's opengl file) if i turn off hardware acceleration it works fine (but its really slow)
 
After about 5 minutes of working in it, when I rotate the viewport, the error message pops up with that dll in the name.
 
 
So can someone that has a geforce go 7900 GS please download the demo and spend 5-10 minutes working in it  (creating objects, rotating the viewport) and see if you get that message.... I'm pretty sure it has to do with the graphics drivers, but I tried 3 different versions and I still get errors
 
 
heres something you can do if you have never used it.. . open it up...  type box ... click and drag in any viewport.... then you can type "filletedge" and select the edges you want to round....
 
to rotate the view, right click and hold in the perspective viewport.     .... just mess around for 5-10 min
 
thanks!
  • Entropy42

    529 Posts

    103

    0

    Posted September 19th, 2006 19:00



    @soljarag wrote:
    Ever since i got my Dell Inspiron 9400 with the geforce 7900 GS video card, the OpenGL CAD program Rhino3D gives me an error with the nvoglnt.dll file error (thats nvidia's opengl file) if i turn off hardware acceleration it works fine (but its really slow)

     

    After about 5 minutes of working in it, when I rotate the viewport, the error message pops up with that dll in the name.

     

     

    So can someone that has a geforce go 7900 GS please download the demo and spend 5-10 minutes working in it  (creating objects, rotating the viewport) and see if you get that message.... I'm pretty sure it has to do with the graphics drivers, but I tried 3 different versions and I still get errors

     


     

    heres something you can do if you have never used it.. . open it up...  type box ... click and drag in any viewport.... then you can type "filletedge" and select the edges you want to round....

     

    to rotate the view, right click and hold in the perspective viewport.     .... just mess around for 5-10 min

     

    thanks!




    Could be one of two problems:

    1) The GS is a consumer-grade graphics card. Certain features used by CAD programs are not implemented or specifically disabled with non-Quadro cards. I think most CAD programs are supposed to be able to work around these limitations with reduced performance and/or quality though.

    2) Driver problem. www.laptopvideo2go.com is one place you can get non-ancient drivers for the NVidia mobile chipsets.
  • 103

    0

    Posted September 19th, 2006 22:00

    thanks, yeah, it has to be a drive issue.... I had been using an old laptop with a geforce 4 videocard and it worked fine... i'll try that link

    Message Edited by soljarag on 09-19-2006 08:54 PM