UNSOLVED

DANFRE

updated

22 years ago

Closed

D

DANFRE

2 Posts

0

10513

June 4th, 2004 07:00

i8600 turning on issues

Got my i8600 on May 13th and since then I've been using it on APR or plugged to the AC adapter most the time.

Since a week or so, randomly, but more frequently lately, I have problems to turn the notebook on :
The leds light on for a few seconds then shut down. Eventually, notebook starts up after a few tries, or if I quickly press a second time and hold down the ON button while the led are on.

Problem can happen when the notebook is on battery, on the AC adapter or docked on the APR. Everything work fine when it's on and nothing was detected by running Diagnostic CD.

I've tried to remove the battery, hold the ON button, put the battery in, I've tried to switch the RAM modules, to boot up without media bay, without harddrive, without RAM, but it doesn't change anything.

The BIOS was A06 when I received it and I updated it to A08, even though everything worked fine until last week, could the problem be a faulty flash bios?

Any help would be greatly appreciated

PS: my apologies for the very approximate english. )

  • isatori

    1 Message

    176

    0

    Posted June 5th, 2004 22:00

    I too have an i8600 m1.36 with 640mb of ram running xp pro.

    i mostly use the machine as a desktop replacement but when i turn it off it takes several (up to 15 mins worth) of attempts to start.

    the lights come on but i get no boot until eventualy it boots.  I have flashed to bio to A8 in hopes that it would help but it didnt.

    "Problem can happen when the notebook is on battery, on the AC adapter or docked on the APR. Everything work fine when it's on and nothing was detected by running Diagnostic CD." -- the same here.

    this now happens every time i shut the machine down and attempt to boot it back up.  Restart is fine.

  • Compman2000

    14 Posts

    176

    0

    Posted June 6th, 2004 21:00

    Wow, this seems to be more frequent than I thought; I have the same power-on problem.  This is the third thread in two pages I've found on this topic and I'm trying to find a solution as well before sending it back.

  • 176

    0

    Posted June 7th, 2004 16:00

    I have the exact same problem.  My Inspiron 8600 will, very occasionally, start the first time I press the power button.  Most of the time, when you press and release the power button, the three round LEDs next to it (num lock, caps lock, scroll lock) and the power led (first LED on the hinge) turn on and stay on solid for 10 seconds.  You can't do anything during those 10 seconds, it just lengthens the time until the lights go out.  When they go out, you can try again.  So, if it takes 10 attempts before it turns on, it takes 2 minutes or more!  It is very frustrating.

    I have an 8600, 1.6 MHz Pentium M, 512 MB (2-256) and the 1300 wireless.  I had this problem new out of the box in March, and still have it.  Flashing the BIOS each time I see a rev (it's now A08) does nothing.

    Other things I've noticed: The hinge switch (for standby) works fine.  Shut the lid, it goes into standby, open it, and it comes out.  But, if it goes into sleep (after a period in standby) and you have to use the silver button, it's as much of a crapshoot as the first time.  Plugged in or on battery doesn't seem to matter.

    I'm not sure if this is a mechanical issue, but I would say that the button doesn't feel *quite* right, almost as if it's slightly depressed on the left side.

    Thanks in advance for your help!

  • Compman2000

    14 Posts

    176

    0

    Posted June 8th, 2004 23:00

    Tech support recommended a motherboard replacement for mine, will probably send it back for them to do so.
  • schmieg

    335 Posts

    176

    0

    Posted June 9th, 2004 03:00

    I have a new I8600 and it has begun demonstrating this same behavior. When I was initially getting it set up, it wouldn't shut down properly and it would do this after a failed shutdown. I had to wait about five minutes before it would boot normally again. After I fixed the shutdown problem by turning off fast user switching, it seemed to go away for a few days. Now it's back, without the shutdown excuse. I have the Platinum service on it so I will be giving them a call in the next couple of days. Other than that, the machine works great.
  • DANFRE

    2 Posts

    176

    0

    Posted June 14th, 2004 17:00

    Well, a tech came today to replace the motherboard.

    Problem appears to be solved. :)

     

    Message Edited by DANFRE on 06-14-2004 08:10 PM