
UNSOLVED
C
chouichanga
50 Posts
0
3282
October 15th, 2016 02:00
XPS8910 Transfer OS from 2TB-HD/32GB-Cache-SSD to a separate SSD?
I had placed this question in a thread on what is an unrelated issue, so forgive me for double posting this:
Although I've read several threads here about placing an SSD as the data drive and leaving the 2TB platter/32GB cache SSD as a data drive, I'm still very concerned about the problems that many users are reporting. Is there a surefire way to make sure that this process actually arrives at a successful result?
Responses (11)
Solutions (0)
once you have the disk clonned, what you can do is open the box again and swap the SATA data cables as they connect to the MoBo. so the system could boot from the same sata data port, but it will be now connected to your SSD.
I did that on my XPS 8910. I installed two Crucial 1TB SSDs 2.5 7mm. as I just had powered the computer for the first time, the cloning took 5 minutes, then for a second I tried to find the BIOS option to manually select one of the crucial disk as boot (used to do this on my old XPS 435), after a few minutes of not seeing the option, I just swaped the data connectors in the MoBo and it worked fine.
Velocity822
16 Posts
1412
1
Posted October 15th, 2016 11:00
I'm confused by this somewhat. I know what you want to do. You want to put an OS on a different hard disk. This is quite easy. First thing is install your operating system on the other drive it's not on currently. Either by cut and paste or your conventional route. Then go into your other drive you want to store your stuff on. Make sure you are using your new OS drive as a surefire OS install drive first. While you are checking your old drive, then make sure all partitions are still there, new ones and such. Delete anything you want and keep what you need also if you like.
You may not be able to clone the old HDD and then image a new, large SSD with that image. The 2T is likely installed in a RAID setup with the 32-GB SSD, so the 32-GB is used as a cache for things Windows needs quickly.
If you install a large SSD (eg 256 GB) and put Windows on it, you won't use the 32-GB cache drive (which should be removed from the PC) so you wouldn't install the OS as a RAID setup. Meaning you'd have to do a clean install on the new SSD.
If you just copy the clone over to the new SSD, it's not going to boot.
chouichanga
50 Posts
1412
0
Posted October 16th, 2016 04:00
RoHe: Yes, this is the conclusion that I've seen in other threads, and that's why it makes me very wary to mess with the C: drive at all. In the past I've been able to get access to a completely fresh OS install as a 6+GB download from the Dell site directly. Does you know if that download is available for the i7 6700K version of the 8910?
One more point...
Dell can be slow in updating files on their download pages. So you're probably better off getting the Win 10 ISO file directly from Microsoft anyway. You're likely to get the Anniversary Update ISO from Microsoft, which will save you from installing Win 10 from Dell, and then having to update that to the Anniversary edition.
And you'll get a cleaner install if you load the Anniversary Update from the get-go.
chouichanga
50 Posts
1412
0
Posted October 18th, 2016 04:00
Thank you for your helpful reply. I will definitely follow your advice. Just for confirmation, after the Win10 reinstall from the MS site I would have to go through and install all the drivers again from scratch from the Dell site, correct?
Creamiepie
1 Rookie
•
53 Posts
240
1
Posted October 21st, 2016 19:00
This is what I would do:
1. Dowload all the drivers from dell website and put it in a usb drive
2. Dowbload a fresh windows 10 from microsoft and place it on a bootsbleusb drive
3. Place the new SSD while leaving the existing disk in place
4. Boot to bios and make sire the sata drives are not on RAID. If it is on Raid change it to AHCI and it will tell you that windows might not boot (and it will not boot!!)
5. Save bios setting
6. Insert windows 10 usb
7. Restart PC
8. Boot with usb
9. Before you install windows 10 clean all partition from old 2tb and 32 gig ssd (both 2tb and 32 gig will be usuallable).
10. Create new partitions on new ssd, 2tb, 32 gig ssd
11. Install windows 10 on new ssd
12. Reinstall all dell drivers
13. Rename old 2tb and 32 gig ssd to whatever you want on windows explorer and use them to whatever you want (I use the 32 gig ssd as my save folder for working documents and files while working on it (photoshop etc...)
14. Done.

Velocity822
16 Posts
1410
0
Posted October 15th, 2016 07:00
So you have two drives?