UNSOLVED

Wrwk

updated

9 years ago

W

Wrwk

1 Rookie

•

78 Posts

0

2096

December 1st, 2017 12:00

XPS8300 Came With Incorrect HD ??

I happened to be reading through some posts here and read that the XPS8300 has SATA III connections for the first two and SATA II for the last two. Is this correct ?   If so, I noticed in SPECCY that my primary (C) hard drive that came with the PC is a SeagateSATA II Drive. If the 8300 has SATA III why did they ship it with a SATA II drive ? 

Thanks...

Storage
Hard drives
                ST31500341AS
                    Manufacturer    Seagate
                    Form Factor    3.5"
                    Heads    16
                    Cylinders    182,401
                    Tracks    46,512,255
                    Sectors    2,930,272,065
                    SATA type    SATA-II 3.0Gb/s

  • beamermt79

    6 Operator

    •

    2342 Posts

    912

    0

    Posted December 1st, 2017 15:00

    Hello!  So a SATA 6 HDD has a theoretical throughput of 750MB/s, while a SATA 3 is 375MB/s.  Real world usage of HDD systems give you about 200MB/s speed so your probably not missing much.  As to why Dell may have done this, if you purchased new from Dell its possible they had a bunch of SATA 2 drives laying around in stock they needed to get rid of.  

  • RoHe

    12 Elder

    •

    45230 Posts

    •

    172625 Points

    912

    0

    Posted December 1st, 2017 17:00

    Was this from their Outlet site?

    Or, was the SATA III HDD an extra cost option that you didn't order...???

  • rdunnill

    8 Professor

    •

    8811 Posts

    •

    35254 Points

    912

    0

    Posted December 2nd, 2017 11:00

    I wouldn't worry about it. All hard drives are inherently slow, and SATA II is more than enough bandwidth.

  • vtoy116

    2 Intern

    •

    307 Posts

    912

    0

    Posted December 2nd, 2017 13:00

    SATA ii HDDs are compatible with SATA III ports so just because  the PC came with a SATA II drive does not mean it is incorrect. It is only incorrect if your purchase order/computer specs specifically says you are supposed to get a SATA III drive.

  • Wrwk

    1 Rookie

    •

    78 Posts

    912

    0

    Posted December 3rd, 2017 02:00

    Thank you all for your replies. Given the specs for my current drive and PC (XPS 8300) would I see a big improvement if I were to replace the current drive with a SSD ?

                         ST31500341AS

                       Manufacturer    Seagate

                       Form Factor    3.5"

                       Heads    16

                       Cylinders    182,401

                       Tracks    46,512,255

                       Sectors    2,930,272,065

                       SATA type    SATA-II 3.0Gb/s

  • vtoy116

    2 Intern

    •

    307 Posts

    912

    0

    Posted December 3rd, 2017 05:00

    You  should see an improvement in boot time and application load times. Because of the cost of an SSD, you will probably not be completely replacing the HDD with an SSD of similar size so you will have to have both and manage the storage of programs and data between the SSD and the HDD.

  • Wrwk

    1 Rookie

    •

    78 Posts

    912

    0

    Posted December 3rd, 2017 11:00

    Thank you. Yes I did intend to keep the old drive as a storage drive after replacing it with a SSD as my main OS drive.

  • Philip_Yip

    11 Legend

    •

    16052 Posts

    •

    65915 Points

    912

    0

    Posted December 9th, 2017 04:00

    Yes you have an old SATAII HDD. My XPS 8300... upgraded to have 3 drives... I think the originals were SATAII 5400 RPM drives.

    SSD attached to SATA 0:

    Heads 16
    Cylinders 60,801
    Tracks 15,504,255
    Sectors 976,768,065
    SATA type SATA-III 6.0Gb/s
    Device type Fixed
    ATA Standard ACS3
    Serial Number 14520E6594A5
    Firmware Version Number MU01
    LBA Size 48-bit LBA
    Power On Count 515 times
    Power On Time 306.6 days
    Speed Not used (SSD Drive)
    Features S.M.A.R.T., APM, NCQ, TRIM, SSD
    Max. Transfer Mode SATA III 6.0Gb/s
    Used Transfer Mode SATA III 6.0Gb/s
    Interface SATA
    Capacity 465 GB
    Real size 500,107,862,016 bytes
    RAID Type None

    HDD attached to SATA 1:

    ST2000DM001-1CH164
    Manufacturer Seagate
    Heads 16
    Cylinders 243,201
    Tracks 62,016,255
    Sectors 3,907,024,065
    SATA type SATA-III 6.0Gb/s
    Device type Fixed
    ATA Standard ATA8-ACS
    Serial Number W1E5681K
    Firmware Version Number CC46
    LBA Size 48-bit LBA
    Power On Count 650 times
    Power On Time 573.8 days
    Speed 7200 RPM
    Features S.M.A.R.T., APM, NCQ
    Max. Transfer Mode SATA III 6.0Gb/s
    Used Transfer Mode SATA III 6.0Gb/s
    Interface SATA
    Capacity 1863 GB
    Real size 2,000,398,934,016 bytes
    RAID Type None

    HDD attached to SATA2:

    Manufacturer Seagate
    Heads 16
    Cylinders 243,201
    Tracks 62,016,255
    Sectors 3,907,024,065
    SATA type SATA-III 6.0Gb/s
    Device type Fixed
    ATA Standard ACS2
    Serial Number W4Z2MM6K
    Firmware Version Number CC46
    LBA Size 48-bit LBA
    Power On Count 457 times
    Power On Time 381.4 days
    Speed 7200 RPM
    Features S.M.A.R.T., APM, NCQ
    Max. Transfer Mode SATA III 6.0Gb/s
    Used Transfer Mode SATA II 3.0Gb/s
    Interface SATA
    Capacity 1863 GB
    Real size 2,000,398,934,016 bytes
    RAID Type None