
UNSOLVED
XPS Generation 5 Memory Problems
I recently purchased 2GB of memory to add to my DELL XPS Generation 5 computer. I installed it as instructed in the manual. I kept the original Dell memory in the 1 and 2 slots, each is 512mb 533 mhz 168 pin memory. I purchased 2 1gb Memory Pro modules and installed them in the 3 and 4 slots. The new memory specs are the same as the original. I boot the computer and everything is fine. The computer recognizes the 3 gb of total ram. I keep getting blue screen messages, shutdowns, and xp error messages. I'm running Win XP Pro. Any help would be appreciated. Thanks
Responses (23)
Solutions (0)
rgcap
I also have the same problem with my XPS. I bought the system with 1 Gb, and have purchased an additional 1 Gb (4 512 Mb modules, all PC2 5300 DDR2 667 Mhz). My system will run for about a half hour, and then everything will start crashing. During restart, the bios reports an error , and says it has to reconfigure memory. Then after Windows Starts, system reports only 512 MB memory.
Now, if the new memory was what was bad, why would one of the original sticks be marked as bad? I have run the original 1 GB without a problem, and have run the new RAM by itself without the problem.
I have a feeling its a heat issue, so my question is....is there a way to add another fan to the XPS? All four motherboard fan connections are already used, but is there a connection availiable on the power supply?
The side fan is running, but I wonder if the dual video cards could be blocking the air flow a bit.
If anyone has added a fan for any reason, how you did it and wear you placed it would be a great help.
- Not an hour after posting that, my computer crashed. And after every subsequent power on, the computer would crash. It got to the point that within a minute, the system would get blue screen.This is what makes me feel its heat, as once it starts crashing, it then crashes with greater frequency.Went back to 1 Gb mem, and computer has been OK since then.

xcator
2 Intern
•
887 Posts
252
0
Posted May 19th, 2006 03:00
First try reseating all memory modules. If still problem, pull the new memory and just run the original dell memory...if no more issues then your problem is the new memory modules.
To troubleshoot a little more if you want, you can remove the original dell memory and put in only the new memory you bought. Run memtest on it to see if any errors. If you can, send it back and get some name brand memory as a replacement. You bought cheap memory. You may also want to run cpu-z to see what they really sent you.